GB/T 12032-1989
Replaced
GB/T 24328.2-2020
Active
National standards
GB/T 24328.2-2020 Tissue paper and tissue products—Part 2:Determination of thickness,bulking thickness and apparent bulk density and bulk
GB/T 24328.2-2020 Tissue paper and tissue products—Part 2:Determination of thickness,bulking thickness and apparent bulk density and bulk
Price:
$ 54
Basic Information
Standard Code:
GB/T 24328.2-2020
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Paper making
ICS Name:
Comprehensive Paper-making Technology
Publish Date:
2020-07-21
Implement Date:
2021-02-01
Pages:
13 pages
Scope
This part of GB/T 24328 specifies the measurement methods for the thickness and layered thickness of toilet paper and its products under a measured pressure of 2.0 kPa, as well as the calculation methods for the apparent layered density and bulk density. This part is applicable to toilet paper and its products.
Development Information
Same series standard
GB/T 24328.1-2020 Tissue paper and tissue products—Part 1:General guidance on terms
GB/T 24328.3-2020 Tissue paper and tissue products—Part 3:Determination oftensile strength, stretch at maximum force and tensile energy absorption
GB/T 24328.4-2020 Tissue paper and tissue products—Part 4:Determination of wet tensile strength
GB/T 24328.6-2020 Tissue paper and tissue products—Part 6:Determination of water-absorption time and water-absorption capacity—Basket-immersion test method
GB/T 24328.7-2020 Tissue paper and tissue products—Part 7:Determination of ball burst strength
GB/T 24328.8-2020 Tissue paper and tissue products—Part 8:Determination of optical properties—Measurement of brightness and colour—D65/10°(outdoor daylight conditions)
GB/T 24328.9-2020 Tissue paper and tissue products—Part 9:Determination of wet ball burst strength
GB/T 24328.10-2020 Tissue paper and tissue products—Part 10:Determination of tensile strength of perforated lines and calculation of perforation efficiency
GB/T 24328.11-2020 Tissue paper and tissue products—Part 11:Determination of optical properties—Measurement of brightness and colour—C/2°(indoor daylight) illuminant
GB/T 24328.12-2020 Tissue paper and tissue products—Part 12:Determination of optical properties—Determination of opacity—Diffuse reflectance method
Replace the following standards
Referenced Standards
GB/T 450-2002 Paper and board—Sampling for testing
GB/T 450-2008 Paper and board—Sampling for testing and identification of machine and cross direction,wire side and felt side
GB/T 10739-2002 Paper, board and pulps—Standard atmosphere for conditioning and testing
GB/T 10739-2023 Paper,board and pulps—Standard atmosphere for conditioning and testing
GB/T 24328.1-2009 Tissue paper and tissue products—Part 1:General principles and terms
GB/T 24328.1-2020 Tissue paper and tissue products—Part 1:General guidance on terms
GB/T 24328.5-2009 Tissue paper and tissue products—Part 5:Determination of grammage
Adopt standards
ISO 12625-3:2014
Related Standards
GB/T 2677.1-1993
Active
GB/T 2677.1-1993 Fibrous raw material of sampling for analysis
GB/T 2677.2-1993
Replaced
GB/T 2677.2-1993 Fibrous raw material—Determination of moisture content
GB/T 2677.3-1993
Replaced
GB/T 2677.3-1993 Fibrous raw material—Determination of ash
GB/T 2677.4-1993
Active
GB/T 2677.4-1993 Fibrous raw material—Determination of water solubility
GB/T 2677.5-1993
Active