GB/T 3002-1982
Replaced
GB/T 4513.8-2017
Active
National standards
GB/T 4513.8-2017 Monolithic(unshaped) refractory products—Part 8:Determination of complementary properties
GB/T 4513.8-2017 Monolithic(unshaped) refractory products—Part 8:Determination of complementary properties
Basic Information
Standard Code:
GB/T 4513.8-2017
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Fire-resistant materials
ICS Name:
Fire-resistant materials
Publish Date:
2017-10-14
Implement Date:
2018-09-01
Pages:
11 pages
Scope
This part of GB/T 4513 specifies the test methods and test reports for the air permeability, thermal shock resistance, thermal conductivity, resistance to sulfuric acid erosion, performance of carbon-containing products, resistance to carbon monoxide, and wear resistance at room temperature of non-shaped refractory materials. The sampling and storage methods for non-shaped refractory materials shall be carried out in accordance with GB/T 4513.5. This method is a supplement to GB/T 4513.6. This method is revised on the basis of the standard for shaped refractory products and is applicable to the dense and insulating castables and tamping materials specified in GB/T 4513.1 before and after firing.
Development Information
Same series standard
GB/T 4513.2-2017 Monolithic(unshaped) refractory products—Part 2:Sampling for testing
GB/T 4513.3-2017 Monolithic(unshaped) refractory products—Part 3:Characterization as received
GB/T 4513.4-2017 Monolithic(unshaped) refractory products—Part 4:Determination of consistency of castables
GB/T 4513.5-2017 Monolithic(unshaped) refractory products—Part 5:Preparation and treatment of test pieces
GB/T 4513.6-2017 Monolithic(unshaped) refractory products—Part 6:Measurement of physical properties
GB/T 4513.7-2017 Monolithic(unshaped) refractory porducts—Part 7:Tests on pre-formed shapes
Referenced Standards
GB/T 3000-1999 Dense shaped refractory products—Determination of permeability to gases
GB/T 3000-2016 Dense shaped refractory products—Determination of permeability to gases
GB/T 4513.1-2015 Monolithic (unshaped) refractory products—Part 1: Introduction andclassification
GB/T 4513.2-2017 Monolithic(unshaped) refractory products—Part 2:Sampling for testing
GB/T 4513.3-2017 Monolithic(unshaped) refractory products—Part 3:Characterization as received
GB/T 4513.5-2017 Monolithic(unshaped) refractory products—Part 5:Preparation and treatment of test pieces
GB/T 4513.6-2017 Monolithic(unshaped) refractory products—Part 6:Measurement of physical properties
GB/T 5990-2006 Refractory materials—Determination of thermal conductivity—Hot-wire method
GB/T 5990-2021 Refractory materials—Determination of thermal conductivity,specific heat capacity and thermal diffusivity(hot-wire method)
GB/T 17601-1998 Dense shaped refractory products—Determination of resistance to sulfuric acid
GB/T 17601-2008 Refractory products—Determination of resistance to sulfuric acid
GB/T 17601-2023 Refractory products—Determination of resistance to acid
GB/T 17732-1999 Dense, shaped refractory products—Test methods for products containing carbon
GB/T 17732-2008 Dense,shaped refractory products—Test methods for products containing carbon
GB/T 17732-2023 Determination of dense shaped refractory products containing carbon
GB/T 18301-2001 Test method for abrasion resistance of refractory materials at room temperature
GB/T 18301-2012 Refractory products—Determination of resistance to abrasion at ambient temperature
GB/T 29650-2013 Refractory products—Determination of resistance to carbon monoxide
Adopt standards
ISO 1927-8:2012
Related Standards
GB/T 3994-1983
Replaced
GB/T 3994-1983 Shaped insulating refractory products—Fireclay bricks
GB/T 3995-1983
Replaced
GB/T 3995-1983 Shaped insulating refractory products—High alumina bricks
GB/T 3996-1983
Abolished
GB/T 3996-1983 Shaped thermal insulating products—Diatomite bricks and shapes
GB/T 4984-1985
Replaced
GB/T 4984-1985 Chemical analysis methods of zirconia-alumina refractories
GB/T 6900.9-1986
Replaced