GB/T 13235.3-1995
Active
GB/T 9109.5-2009
Replaced
National standards
GB/T 9109.5-2009 Petroleum and liquid petroleum products—Calculation of oil quantities—Dynamic measurement
GB/T 9109.5-2009 Petroleum and liquid petroleum products—Calculation of oil quantities—Dynamic measurement
Basic Information
Standard Code:
GB/T 9109.5-2009
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
\nSigns, packaging, transportation, storage
ICS Name:
Volume equipment and volume measurement
Publish Date:
2009-03-16
Implement Date:
2009-10-01
Pages:
32 pages
Scope
This standard specifies the methods for calculating the volume of oil and liquid petroleum products (hereinafter referred to as oil products) in dynamic measurement, defines and explains the terms and symbols used in the calculation of oil volume in dynamic measurement of oil products, prescribes the formulae for calculating the volume of oil in air or under standard reference conditions for oil products equipped with different measuring instruments, and provides the relevant measurement parameters and correction coefficients involved in the calculation of oil volume, as well as their corresponding formulae and numerical tables.
This standard is only applicable to the dynamic measurement of single-phase oil products. The dynamic oil volume calculation methods specified in this standard do not include the calculation of the oil volume of liquefied petroleum gas and stable light hydrocarbons.
The standard reference conditions adopted in this standard for oil volume calculation are: temperature of 20 ℃, and pressure of 101.325 kPa.
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 1885-1998 Petroleum measurement tables
GB/T 260-2016 Test method for water in petroleum products—Distillation method
GB/T 1884-2000 Crude petroleum and liquid petroleum products—Laboratory determination of density—Hydrometer method
GB/T 4756-1998 Petroleum liquids—Manual sampling
GB/T 4756-2015 Method for manual sampling of petroleum liquids
GB/T 6531-1986 Crude petroleum and fuel oils—Determination of sediment—Extraction method
GB/T 8170-1987 Rules for rounding off of numberical values
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 8927-1988 Petroleum and liquid petroleum products—Method of measuring the temperature
GB/T 8927-2008 Petroleum and liquid petroleum products—Temperature measurement—Manual methods
GB/T 8929-1988 Crude oil—Determination of water—Distillation method
GB/T 8929-2006 Crude petroleum—Determination of water—Distillation method
GB/T 21450-2008 Crude petroleum and petroleum products—Compressibility factors for hydrocarbons in the range 638 kg/m3 to 1 074 kg/m3
SH/T 0604-2000 Crude petroleum and petroleum products--Determination of density--Oscillationg U-tube method
SY/T 5317-2006 SY/T 5317-2006 Petroleum liquid pipeline automatic sampling method
Adopt standards
ISO 4267-2:1988
Related Standards
GB/T 6968-1997
Replaced
GB/T 6968-1997 Diaphragm gas meters
GB/T 17286.1-1998
Replaced
GB/T 17286.1-1998 Liquid hydrocarbons—Dynamic measurement—Proving systems for volumetric meters—Part 1:General principles
GB/T 17286.2-1998
Replaced
GB/T 17286.2-1998 Liquid hydrocarbons—Dynamic measurement—Proving systems for volumetric meters—Part 2:Pipe provers
GB/T 17286.3-1998
Replaced
GB/T 17286.3-1998 Liquid hydrocarbons—Dynamic measurement—proving systems for volumetric meters—Part 3:Pulse interpolation techniques
GB/T 17287-1998
Active