GB/T 1148-2024 Active National standards

GB/T 1148-2024 Internal combustion engines—Aluminum pistons

GB/T 1148-2024 Internal combustion engines—Aluminum pistons

Publish Date: 2024-09-29 Implement Date: 2025-04-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 1148-2024

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: The body and moving parts

ICS Name: Internal combustion engine

Publish Date: 2024-09-29

Implement Date: 2025-04-01

Pages: 30 pages

Scope

This document specifies the terms and definitions of aluminum pistons for internal combustion engines, the names of various parts, technical requirements, inspection methods, acceptance rules, and marking, packaging, transportation, and storage. This document is applicable to the manufacture of aluminum pistons for reciprocating internal combustion engines with a cylinder diameter not exceeding 200 mm. Aluminum pistons for other purposes shall be implemented in accordance with this document.

Development Information

Word Count: 54 Thousand words Pages: 30 pages

Replace the following standards

GB/T 1148-2010 Internal combustion engines—Aluminium pistons—Specifications

Referenced Standards

GB/T 1149.1-2008 Internal combustion engines—Piston rings—Part 1:General specifications GB/T 1958-2017 Geometrical Product Specifications(GPS)—Geometrical tolerance—Verification GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 893-2017 Retaining rings for bores GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 6519-2000 Process for ultrasonic inspection of wrought aluminum alloy products GB/T 6519-2013 Ultrasonic inspection of wrought aluminium and magnesium alloy products GB/T 6519-2024 Ultrasonic inspection of wrought aluminium and magnesium alloy products GB/T 35388-2017 Non-destructive testing—X-ray digital radiography—Practice JB/T 6289-2019 JBT 6289-2019 In-cylinder engine Cast aluminum piston metallographic inspection JB/T 14615-2024 Internal combustion engine piston motion component cleanliness limit and measurement method JB/T 6289-1992 Cast Aluminum Pistons for Internal Combustion Engines - Metallographic Inspection

Related Standards

GB/T 3821-1983 Replaced

GB/T 3821-1983 Determination of cleanliness for small and medium power internal combustion engines

Publish Date: 1983-08-09

GB/T 1147-1987 Replaced

GB/T 1147-1987 Reciprocating internal combustion engines—General technical specifications

Publish Date: 1987-01-12

GB/T 725-1991 Replaced

GB/T 725-1991 Internal combustion engines—Nomenclature and code of designations

Publish Date: 1991-03-22

GB/T 1149.3-1992 Replaced

GB/T 1149.3-1992 Internal combustion engines—Piston rings-Scraper rings

Publish Date: 1992-11-14

GB/T 1149.5-1992 Replaced

GB/T 1149.5-1992 Internal combustion engines—Piston rings-Oil control rings

Publish Date: 1992-11-14

GB/T 1151-1993 Replaced

GB/T 1151-1993 Internal combustion engines—Main and connecting rod bearings—Specification

Publish Date: 1993-03-03