GB/T 14428-1993
Abolished
GB/T 18488.1-2006
Replaced
National standards
GB/T 18488.1-2006 The electrical machines and controllers for electric vehicles—Part 1:General specification
GB/T 18488.1-2006 The electrical machines and controllers for electric vehicles—Part 1:General specification
Basic Information
Standard Code:
GB/T 18488.1-2006
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
New energy vehicles and other types of vehicles
ICS Name:
Tram
Publish Date:
2006-12-01
Implement Date:
2007-07-01
Pages:
20 pages
Scope
This part specifies the working conditions, specifications, environmental conditions, technical requirements, inspection and test items, and type test requirements for drive motors and their controllers used in electric vehicles. This part applies to drive motors and their controllers for electric vehicles. For matters related to motors that are not specified in this part, they shall comply with GB 755-2000. If there are special requirements, users and manufacturers may stipulate them in a dedicated technical agreement. For matters related to drive controllers that are not specified in this part, they shall comply with GB/T 3859.1-1993. If there are special requirements, users and manufacturers may stipulate them in a dedicated technical agreement.
Development Information
Same series standard
Replace the following standards
Superseded by the following standards
Referenced Standards
GB 755-2000 Rotating electrical machines—Rating and performance
GB/T 2423.17-1993 Basic environmental testing procedures for electric and electronic products Test Ka:Salt mist
GB/T 3859.1-1993 Semiconductor convertors—Specification of basic requirements
GB/T 4772.1-1999 Dimensions and output series for rotating electrical machines—Part 1:Frame numbers 56 to 400 and flange numbers 55 to 1080
GB/T 4942.1-2006 Degrees of protection provided by the integral design of rotating electrical machined(IP code)—Classification
GB/T 4942.2-1993 Degrees of protection provided by enclosures for low-voltage apparatus
GB 10068-2000 Mechanical vibration of certain machines with shaft heights 56mm and higher—Measurement,evaluation and limits of vibration
GB 10069.3-2006 Measurement of airborne noise emitted by rotating electrical machines and the noise limits—Part 3:Noise limits
GB/T 12113-2003 Methods of measurement of touch current and protective conductor current
GB/T 12665-1990 Requirements of damp-heat testing of electrical machine for service in general environmental condition
GB 14023-2006 Vehicles,boats,and internal combustion engine driven devices—Radio disturbance characteristics—Limits and methods of measurement
GB 14711-2006 Safety requirements of small and medium size rotating electrical machines
GB/T 17619-1998 Limits and methods of testing for immunity of electrical/electronic sub—assemblies in vehicles to electromagnetic radiation
GB/T 19596-2004 Terminology of electric vehicles
QC/T 413-2002 Car electrical and electronic equipment basic technical requirements
Related Standards
CJ/T 1-1999
Active
CJ/T 1-1999 Power supply system for urban trolleybus and tramway
CJ/T 3-1999
Active
CJ/T 3-1999 Urban trolleybus and tramway—Pole for power supply network
GB/T 18488.2-2001
Replaced
GB/T 18488.2-2001 Test procedures of the electrical machines and controllers for electric vehicles
GB/T 18488.1-2001
Replaced
GB/T 18488.1-2001 General specification of the electrical machines and controllers for electric vehicles
GB/T 18488.2-2006
Replaced