GB 12981-2012 Active National standards force_standard

GB 12981-2012 Motor vehicle brake fluids

GB 12981-2012 Motor vehicle brake fluids

Publish Date: 2012-05-11 Implement Date: 2012-10-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB 12981-2012

Standard Type: National standards

Standard Status: Active

is_force_gb: yes

CCS Name: Hydraulic oil

ICS Name: Hydraulic fluid

Publish Date: 2012-05-11

Implement Date: 2012-10-01

Pages: 38 pages

Scope

This standard specifies the requirements and test methods, inspection rules, and marking, packaging, transportation, and storage for non-petroleum-based brake fluids used in hydraulic braking and hydraulic clutch systems of motor vehicles.
This standard applies to brake fluids for motor vehicles that are in contact with seals made from styrene-butadiene rubber (SBR) or ethylene-propylene-diene monomer (EPDM), and are based on non-petroleum-based raw materials and contain various additives.
This standard does not apply to brake fluids used in polar environmental conditions.

Development Information

Word Count: 72 Thousand words Pages: 38 pages

Replace the following standards

GB 12981-2003 Motor vehicle brake fluids

Referenced Standards

HG 2865 GB/T 265-1988 Petroleum products—Determination of kinematic viscosity and calculation of dynamic viscosity GB/T 514-1983 Liquid in glass thermometers for petroleum products—Specification GB/T 514-2005 Specification for liquid-in-glass thermometers for testing of petroleum products GB/T 710-1991 Hot-rolled quality carbon structural steel sheets and strips GB/T 710-2008 Hot-rolled quality carbon structural steel sheets and strips GB/T 2520-2000 Cold-reduced electrolytic tinplate GB/T 2520-2008 Cold-reduced electrolytic tinplate GB/T 2520-2017 Cold-reduced electrolytic tinplate GB/T 3190-1996 Wrought aluminium and aluminium alloys—Chemical composition limits GB/T 3190-2008 Wrought aluminium and aluminium alloy——Chemical composition GB/T 3190-2020 Chemical composition of wrought aluminium and aluminium alloys GB/T 4756-1998 Petroleum liquids—Manual sampling GB/T 4756-2015 Method for manual sampling of petroleum liquids GB/T 5231-2001 Wrought copper and copper alloys chemical composition limits and forms of wrought products GB/T 5231-2012 Designation and chemical composition of wrought copper and copper alloys GB/T 5231-2022 Designation and chemical composition of wrought copper and copper alloys GB/T 5345-1985 Labelling of containers for brake fluid GB/T 5345-2008 Road vehicles—Labelling of containers for petroleum-based or non-petroleum-based brake fluid GB/T 5345-2019 Road vehicles—Labelling of containers for petroleum-based or non-petroleum-based brake fluid GB/T 8170-1987 Rules for rounding off of numberical values GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values GB/T 8926-2012 Standard test method for insolubles in used lubricating oils GB/T 9439-1988 Grey iron castings GB/T 9439-2010 Grey iron castings GB/T 9439-2023 Grey iron castings GB/T 10586-2006 Specifications for damp heat testing chambers GB/T 11158-2008 Specifications for high temperature test chambers GB/T 13818-1992 Zinc die-casting alloys GB/T 13818-2009 Die casting zinc alloys GB/T 13818-2024 Die casting zinc alloys SH/T 0086-1991 The method for determining the water content in concentrated engine coolant (Karl Fischer method) SH 0164-1992 Rules for packaging, storage, transportation, and acceptance of petroleum products SH/T 0430-1992 Brake Fluid Balance Recirculating Boiling Point Determination Method GB/T 10586-2025 Specifications for damp heat testing chambers QC/T 77-2015 Technical requirements and bench testing methods for automotive hydraulic brake cylinder QC/T 311-2018 The performance requirements and bench testing methods for the hydraulic brake master cylinder of automobiles QC/T 311-2008 Car hydraulic brake master cylinder performance requirements and bench testing methods QC/T 311-2026 The performance requirements and bench testing methods for the automotive vacuum booster with brake master cylinder assembly

Adopt standards

ISO 4925:2005

Related Standards

GB 11118.1-1994 Replaced

GB 11118.1-1994 Hydraulic fluids of mineral oil type and synthetic hydrocarbon type

Publish Date: 1994-04-07

GB/T 16898-1997 Active

GB/T 16898-1997 Guidelines for use of fire-resistant hydraulic fluids

Publish Date: 1997-07-02

SH/T 0644-1997 Active

SH/T 0644-1997 Aviation hydraulic oils--Test method of low temperature stability

Publish Date: 1997-07-12

JG/T 70-1999 Abolished

JG/T 70-1999

Publish Date: 1999-06-04

GB 12981-2003 Replaced

GB 12981-2003 Motor vehicle brake fluids

Publish Date: 2003-03-06

GB/T 21449-2008 Active

GB/T 21449-2008 Water glycol fire-resistant hydraulic fluids

Publish Date: 2008-02-13