GB/T 31553-2025 Active National standards

GB/T 31553-2025 External-heating hot blast cupola furnace

GB/T 31553-2025 External-heating hot blast cupola furnace

Publish Date: 2025-10-31 Implement Date: 2026-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 31553-2025

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Casting equipment

ICS Name: Molding equipment and casting equipment

Publish Date: 2025-10-31

Implement Date: 2026-05-01

Pages: 16 pages

Scope

This document specifies the type, basic parameters, and technical requirements of external hot-air blast furnaces, describes the corresponding test methods, and stipulates the inspection rules, marking, packaging, transportation, and storage.
This document is applicable to the manufacture of external hot-air blast furnaces.

Development Information

Word Count: 23 Thousand words Pages: 16 pages

Replace the following standards

GB/T 31553-2015 External combustion hot blast cupola

Referenced Standards

GB/T 713.2-2023 Steel plate,sheet and strip for pressure equipments—Part 2:Non-alloy and alloy steel with specified temperature properties GB/T 985.1-2008 Recommended joint preparation for gas welding,manual metal arc welding,gas-shield arc welding and beam welding GB/T 985.2-2008 Recommended joint preparation for submerged arc welding GB/T 1184-1996 Geometrical tolerancing—Geometrical tolerance for features without individual tolerance indications GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance indications GB/T 3098.1-2010 Mechanical properties of fasteners—Bolts,screws and studs GB/T 3098.2-2015 Mechanical properties of fasteners—Nuts GB 5226.1-2002 Safety of machinery—Electrical equipment of machines—Part 1:General requirements GB 5226.1-2008 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements GB/T 5226.1-2019 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements GB/T 9969-2008 General principles for preparation of instructions for use of industrial products GB 9969.1-1998 General principles for preparation of instructions for use of industrial products GB/T 18717.2-2002 Ergonomic design for the safety of machinery—Part 2:Principles for determining the dimensions required for openings for access of parts of the body into machinery GB 20905-2007 Safety requirements for foundry machinery GB/T 23570-2009 Welding parts for metal cutting machines—General specifications GB/T 23571-2009 Metal cutting machine tools—Technic document compiled GB/T 25370-2010 Foundry machinery—Terminology GB/T 25370-2020 Foundry machinery—Vocabulary GB/T 25371-2010 Foundry machinery—Measurement method of sound pressure level GB/T 25711-2023 Foundry machinery—General technical specification GB/T 31552-2015 Foundry machinery—Model formulating means GB/T 31552-2023 Foundry machinery—Classification and model designation JB/T 11534-2013 JBT 11534-2013 Flotation furnace smelting operation requirements JB/T 12245-2015 JB/T 12245-2015 Flushing furnace smelting and pouring Terminology NB/T 47013.3-2023 Non-destructive testing of pressure equipment - Part 3: Ultrasonic testing

Related Standards

GB/T 4170-1984 Replaced

GB/T 4170-1984 Components of injection mould for plastics—Specification

Publish Date: 1984-02-27

GB/T 8845-1988 Replaced

GB/T 8845-1988 Terminology for dies

Publish Date: 1988-02-29

GB/T 9453-1988 Replaced

GB/T 9453-1988 Terminology of forging dies and elements

Publish Date: 1988-06-24

GB/T 2851.1-1990 Replaced

GB/T 2851.1-1990 Sliding guide die sets for press tools—Diagonal pillar sets

Publish Date: 1990-07-23

GB/T 2851.3-1990 Replaced

GB/T 2851.3-1990 Sliding guide die sets for press tools—Back pillar sets

Publish Date: 1990-07-23

GB/T 2851.4-1990 Replaced

GB/T 2851.4-1990 Sliding guide die sets for press tools—Back pillar sets (narrow)

Publish Date: 1990-07-23