GB/T 10671-1989
Replaced
GB/T 14616-2026
Pending
National standards
GB/T 14616-2026 Engine-room bottom coating
GB/T 14616-2026 Engine-room bottom coating
Price:
$ 33.00
Basic Information
Standard Code:
GB/T 14616-2026
Standard Type:
National standards
Standard Status:
Pending
is_force_gb:
no
CCS Name:
Ship materials and their inspection methods
ICS Name:
Shipbuilding materials and parts
Publish Date:
2026-03-31
Implement Date:
2026-10-01
Pages:
12 pages
Scope
This document specifies the requirements for engine room bilge paints, test methods, inspection rules, and packaging, marking, transportation, and storage.
This document is applicable to engine room bilge paints used in areas below the engine room steel plates of steel ships, including main engines, auxiliary engines, and pump rooms.
Development Information
Replace the following standards
Referenced Standards
GB/T 1725-2007 Paints,varnishes and plastics—Determination of non-volatile-matter content
GB/T 1727-1992 General preparation of paint film
GB/T 1727-2021 General methods for preparation of coating films
GB/T 1728-2020 Determination of drying time of coating and putty films
GB/T 1766-1995 Paint and varnish—Rating schemes of degradation of coats
GB/T 1766-2008 Paints and varnishes—Rating schemes of degradation of coats
GB 3186-1982 Sampling paint products
GB/T 3186-2006 Paints, varnishes and raw materials for paints and varnishes—Sampling
GB/T 5206-2015 Paints and varnishes—Terms and definitions
GB/T 5206.1-1985 Paints and varnishes—Vocabulary—Part 1:General terms
GB/T 5206.2-1986 Paints and varnishes—Vocabulary—Part 2:Terminology of resins
GB/T 5206.3-1986 Paints and varnishes—Vocabulary—Part 3:Pigment terms
GB/T 5206.4-1989 Paints and varnishes—Vocabulary—Part 4:Terminology relating to physical and chemical properties of coatings and films
GB/T 5206.5-1991 Paints and varnishes—Vocabulary—Part 5:Terminology relating to defects of coatings and films
GB/T 5210-1985 Determination of adhesion of coats—Pull-off test
GB/T 5210-2006 Paints and varnishes—Pull-off test for adhesion
GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
GB/T 8170-1987 Rules for rounding off of numberical values
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 8923.1-2011 Preparation of steel substrates before application of paints and related products—Visual assessment of surface cleanliness—Part 1:Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
GB/T 9271-1988 Paints and varnishes—Standard panels for testing
GB/T 9271-2008 Paints and varnishes—Standard panels for testing
GB/T 9274-1988 Paints and varnishes—Determination of resistance to liquids
GB 9278-1988 Temperatures and humidities for conditioning and testing of paint specimens
GB/T 9278-2008 Temperatures and humidities for conditioning and testing of paint specimens
GB/T 9750-1998 Marks for package of coating products
GB/T 9750-2025 General rules for packaging,labelling,transport and storage of coating material and pigment products
GB/T 10125-1997 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2012 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2021 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 13288.1-2008 Preparation of steel substrates before application of paints and related products—Surface roughness characteristics of blast-cleaned substrates—Part 1:Specification and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
GB/T 13452.2-1992 Paints and varnishes—Determination of film thickness
GB/T 13452.2-2008 Paints and varnishes—Determination of film thickness
GB/T 20777-2006 Paints and varnishes—Examination and preparation of samples for testing
GB/T 30789.8-2015 Paints and varnishes—Evaluation of degradation of coatings—Designation of quantity and size of defects,and of intensity of uniform changes in appearance—Part 8:Assessment of degree of delamination and corrosion around a scribe or other artificial defect
GB/T 31416-2015 Paints and varnishes—Determination of the pot-life of multicomponent coating systems—Preparation and conditioning of samples and guidelines for testing
Related Standards
GB/T 10834-1989
Replaced
GB/T 10834-1989 Ship coatings—Determination of resistance to salt water—Salt water and hot salt water immersion method
GB/T 12900-1991
Replaced
GB/T 12900-1991 General terminology for ships—Shipbuilding material
GB/T 16167-1996
Replaced
GB/T 16167-1996 Technical conditions of lifeboat glass fiber reinforced plastics laminate
GB/T 552-1996
Abolished
GB/T 552-1996 Anchor chain casting steel
CB/T 3293-1997
Replaced