GB/T 3770-1983
Active
GB/T 4214.7-2012
Replaced
National standards
GB/T 4214.7-2012 Household and similar electrical appliances—Test code for determination of airborne acoustical noise—Particular requirements for tumble dryers
GB/T 4214.7-2012 Household and similar electrical appliances—Test code for determination of airborne acoustical noise—Particular requirements for tumble dryers
Basic Information
Standard Code:
GB/T 4214.7-2012
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Noise and vibration testing methods
ICS Name:
The noise from machines and equipment
Publish Date:
2012-11-05
Implement Date:
2013-03-01
Pages:
13 pages
Scope
1.1.1 Overview
Replacement:
This part applies to single-motor drum-type tumble dryers for general household and similar use, intended to be placed against a wall on the floor, installed or placed on a countertop, kitchen worktop, or under a sink, or mounted on a wall or a countertop. Given the purpose of this part, when a drum-type washing and drying machine is used as a tumble dryer, it shall be treated as a drum-type tumble dryer.
The limitations of the testing methods are described in 1.1.1 of GB/T 4214.1—2000.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 3241-1998 Octave-band and fractional-octave-band filters
GB/T 3767-1996 Acoustics—Determination of sound power levels of noise sources using sound pressure—Engineering method in an essentially free field over a reflecting plane
GB/T 3785-1983 Electric, sonic properties and measuring methods for sound level meters
GB/T 4129-1995
GB/T 6881-1986
GB/T 6882-1986 Acoustics—Determination of sound power levels of noise sources—Precision methods for anechoic and semi-anechoic rooms
GB/T 17181-1997 Integrating-averaging sound level meters
ISO 3743-1:1994.
ISO 3743-2:1994
ISO 12001:1996
IEC 704-3:1992
GB/T 18884.4-2002 House hold kitchen—Part 4:Design and installation
GB/T 20292-2006 Tumble dryers for household use—Methods for measuring the performance
ISO 7235:1991
Adopt standards
IEC 60704-2-6:2003
Related Standards
GB/T 4215-1984
Abolished
GB/T 4215-1984 Determination of sound power levels of noise emitted by metal-cutting machine tools
GB/T 5898-1986
Replaced
GB/T 5898-1986 Measurement of noise emitted by rock drilling machines and pneumatic tools—Engineering method
GB 5979-1986
Abolished
GB 5979-1986 Regulation on noise levels on board sea-going ships
GB/T 6446-1986
Abolished
GB/T 6446-1986 Frequency weighting for the measurement of aircraft noise (D—weighting)
GB/T 7182-1987
Abolished