FZ/T 99015-2020
Active
Industry standards-Textiles
FZ/T 99015-2020 Technical regulations of general textile electric-driving control gear
FZ/T 99015-2020 Technical regulations of general textile electric-driving control gear
Price:
$ 28.00
Basic Information
Standard Code:
FZ/T 99015-2020
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Electrical and automation control devices for textile machinery
ICS Name:
Comprehensive Textile Machinery
Publish Date:
2020-04-16
Implement Date:
2020-10-01
Pages:
16 pages
Scope
This standard specifies the working conditions, design and manufacture, safety and electromagnetic compatibility, reliability, test methods and inspection rules, technical data, packaging, transportation and storage of general electric control equipment for textiles.
This standard applies to general electric control equipment for textiles installed indoors. The electric control equipment discussed in this standard starts from the power supply of mechanical and electrical equipment. Its rated voltage does not exceed 1,000 V (AC) or 1,500 V (DC), and its rated frequency does not exceed 200 Hz. For higher voltages or frequencies, reference can be made to this standard.
Development Information
Replace the following standards
Referenced Standards
GB 156-2003 Standard voltages
GB/T 156-2007 Standard voltages
GB/T 156-2017 Standard voltages
GB/Z 156-2025 Good practice for dynamic light scattering(DLS) measurements
GB/T 762-2002 Standard current ratings
GB/T 1980-1996 Standard frequencies
GB/T 1980-2005 Standard frequencies
GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold
GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold
GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products—Test Ca:Damp heat, steady state
GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state
GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state
GB/T 2423.8-1995 Environmental testing for electric and electronic products—Parts 2:Test methods—Test Ed:Free fall
GB/T 3797-2016 Electrical control assemblies
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4728.1-2005 Graphical symbols for electrical diagrams—Part 1:General information
GB/T 4728.1-2018 Graphical symbols for electrical diagrams—Part 1:General information
GB/T 4728.2-1998 Graphical symbols for diagrams—Part 2 Symbol elements,qualifying symbols and other symbols having general application
GB/T 4728.2-2005 Graphical symbols for electrical diagrams—Part 2:Symbol elements,qualifying symbols and other symbols having general application
GB/T 4728.2-2018 Graphical symbols for electrical diagrams—Part 2:Symbol elements,qualifying symbols and other symbols having general application
GB/T 4728.3-1998 Graphical symbols for diagrams—Part 3 Conductors and connecting devices
GB/T 4728.3-2005 Graphical symbols for electrical diagrams—Part 3:Conductors and connecting devices
GB/T 4728.3-2018 Graphical symbols for electrical diagrams—Part 3:Conductors and connecting devices
GB/T 4728.4-1999 Graphical symbols for diagrams—Part 4:Basic passive components
GB/T 4728.4-2005 Graphical symbols for electrical diagrams—Part 4:Basic passive components
GB/T 4728.4-2018 Graphical symbols for electrical diagrams—Part 4:Basic passive components
GB/T 4728.5-2000 Graphical symbols for diagrams—Part 5:Semiconductors and electron tubes
GB/T 4728.5-2005 Graphical symbols for electrical diagrams—Part 5:Semiconductors and electron tubes
GB/T 4728.5-2018 Graphical symbols for electrical diagrams—Part 5:Semiconductors and electron tubes
GB/T 4728.6-2000 Graphical symbols for diagrams—Part 6:Production and conversion of electrical energy
GB/T 4728.6-2008 Graphical symbols for diagrams—Part 6:Production and conversion of electrical energy
GB/T 4728.6-2022 Graphical symbols for electrical diagrams—Part 6:Production and conversion of electrical energy
GB/T 4728.7-2000 Graphical symbols for diagrams—Part 7:Switchgear,controlgear and protective devices
GB/T 4728.7-2008 Graphical symbols for diagrams—Part 7:Switchgear,controlgear and protective devices
GB/T 4728.7-2022 Graphical symbols for electrical diagrams—Part 7:Switchgear,controlgear and protective devices
GB/T 4728.8-2000 Graphical symbols for diagrams—Part 8:Measuring instruments,lamps and signalling devices
GB/T 4728.8-2008 Graphical symbols for diagrams—Part 8:Measuring instruments,lamps and signaling devices
GB/T 4728.8-2022 Graphical symbols for electrical diagrams—Part 8:Measuring instruments,lamps and signalling devices
GB/T 4728.9-1999 Graphical symbols for diagrams—Part 9:Telecommunications:Switching and peripheral equipment
GB/T 4728.9-2008 Graphical symbols for diagrams—Part 9:Telecommunications:Switching and peripheral equipment
GB/T 4728.9-2022 Graphical symbols for electrical diagrams—Part 9:Telecommunications:Switching and peripheral equipment
GB/T 4728.10-1999 Graphical symbols for diagrams—Part 10:Telecommunications:Transmission
GB/T 4728.10-2008 Graphical symbols for diagrams—Part 10:Telecommunications:Transmission
GB/T 4728.10-2022 Graphical symbols for electrical diagrams—Part 10:Telecommunications:Transmission
GB/T 4728.11-2000 Graphical symbols for diagrams—Part 11:Architectural and topographical installation plans and diagrams
GB/T 4728.11-2008 Graphical symbols for diagrams—Part 11:Architectural and topographical installation plans and diagrams
GB/T 4728.11-2022 Graphical symbols for electrical diagrams—Part 11:Architectural and topographical
GB/T 4728.12-1996 Graphical symbols for electrical diagrams—Part 12:Binary logic elements
GB/T 4728.12-2008 Graphical symbols for diagrams—Part 12:Binary logic elements
GB/T 4728.12-2022 Graphical symbols for electrical diagrams—Part 12:Binary logic elements
GB/T 4728.13-1996 Graphical symbols for electrical diagrams Part 13:Analogue elements
GB/T 4728.13-2008 Graphical symbols for diagrams—Part 13:Analogue elements
GB/T 4728.13-2022 Graphical symbols for electrical diagrams—Part 13:Analogue elements
GB/T 5226.1-2019 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB/T 7111.1-2002 Textile machinery—Noise test code—Part 1:Common requirements
GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test
GB/T 17626.11-2018
GB/T 29482.1-2013 Numerical control system of industrial machines—Part 1:General requirments
FZ/T 90001-2006 Product package of textile machinery
FZ 90001-1991 Textile machinery product packaging
FZ/T 90045-2005 Drafting methods of model for the products of textile machinery
FZ/T 90054-2009 Product package on instrument of textile machinery
FZ/T 90072-2014 Electrical equipment for textile machinery—Control cabinet dimension series
FZ/T 99014-2014 Electrical equipment of textile machinery—General technical requirements
FZ/T 99016-2013 Electrical control systems of textile machinery—Continuity of the protective bonding circuit test specifications
FZ/T 99017-2013 Electrical control systems of textile machinery—Insulation resistance test specifications
FZ/T 99018-2013 Electrical control systems of textile machinery—High-voltage test specifications
Related Standards
GB/T 17780-1999
Replaced
GB 18399-2001
Active
GB 18399-2001 Security requirement of cotton processing machinery
FZ/T 93060-2003
Replaced
FZ/T 93060-2003 Nonwoven card
FZ/T 93061-2003
Replaced
FZ/T 93061-2003 Nonwoven lapping machine
FZ/T 93062-2003
Replaced
FZ/T 93062-2003 Needle punching for nonwoven production unit
GB/T 19549-2004
Active