GB/T 12448-1990
Replaced
GB/T 46625-2025
Active
National standards
GB/T 46625-2025 Safety of woodworking machines—Edge banding machines fed by chains
GB/T 46625-2025 Safety of woodworking machines—Edge banding machines fed by chains
Price:
$ 99.00
Basic Information
Standard Code:
GB/T 46625-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Woodworking machine tools and machine tools
ICS Name:
Woodworking machinery
Publish Date:
2025-10-31
Implement Date:
2026-05-01
Pages:
56 pages
Scope
This document sets forth the safety requirements and measures for edge banding machines (hereinafter referred to as "machines") that are fed by chains or belts, manually loaded and unloaded, and capable of continuous processing with a maximum workpiece height of 100 mm.
This document addresses all major hazards, dangerous situations, and incidents related to the machine as listed in Appendix A (List of Hazards) when the machine is operated, adjusted, and maintained as intended by the manufacturer, including reasonably foreseeable misuse. Additionally, hazards during transportation, assembly, disassembly, decommissioning, and scrapping stages are considered.
The machine is designed for one-time processing of the following board materials on one side (single-end machines) or both sides (double-end machines):
— Materials with physical properties similar to wood (see GB/T 44902-2024, 3.2), even lightweight aluminum core boards;
— Gypsum boards.
The edge banding strips used by the machine can be made of the following materials:
— Paper;
— Melamine;
— Plastics;
— Composite materials;
— Aluminum;
— Lightweight alloys;
— Veneer;
— Solid wood.
This document also applies to machines equipped with one or more of the following devices/work units, provided that the associated hazards have been addressed:
— Hot air edge banding units;
— Laser edge banding units;
— Infrared edge banding units;
— Dynamic processing units;
— Sanding belt units;
— Milling units installed outside the overall housing on one side of the board in single-end machines;
— Milling units installed outside the overall housing between the two machine halves in double-end machines;
— Additional fixed or movable workpiece supports along the feeding direction;
— Additional feeding workpiece supports;
— Additional discharging workpiece supports;
— Feeding devices for transverse loading of boards in single-end machines;
— Workpiece suppo
Development Information
Referenced Standards
GB/T 15706-2012 Safety of machinery—General principles for design—Risk assessment and risk reduction
GB/T 16855.1-2018 Safety of machinery—Safety-related parts of control systems—Part 1:General principles for design
GB/T 17454.2-2017 Safety of machinery—Pressure-sensitive protective devices—Part 2:General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
GB/T 18209.1-2010 Electrical safety of machinery—Indication,marking and actuation—Part 1:Requirements for visual,acoustic and tactile signals
GB/T 18490.1-2017 Safety of machinery—Laser processing machines—Part 1:General safety requirement
GB/T 44902-2024 Safety of woodworking machines—Common requirements
ISO 13732-1:2006
IEC 60825-1:2014
EN 847-1:2017
EN 847-2:2017
EN 12198-2:2002+A1:2008
Adopt standards
ISO 19085-17:2021
Related Standards
GB/T 13568-1992
Replaced
GB/T 13568-1992 Woodworking machines table bandsawing machines—Accuracy tests
GB/T 13569-1992
Replaced
GB/T 13569-1992 Woodworking machines—Surface planing machines with cutterblock for one side dressing—Accuracy tests
GB/T 13570-1992
Replaced
GB/T 13570-1992 Woodworking machines—Single spindle moulding machines—Accuracy tests
GB/T 13571-1992
Replaced
GB/T 13571-1992 Woodworking machines—Single spindle boring machines —Accuracy tests
GB/T 13572-1992
Replaced