GB/T 7124-1986
Replaced
T/SHPTA 069-2023
Active
Group standards
T/SHPTA 069-2023 Reactive Polyurethane Hot Melt Adhesive for Automotive Interior Materials
T/SHPTA 069-2023 Reactive Polyurethane Hot Melt Adhesive for Automotive Interior Materials
Price:
$ 31.00
Basic Information
Standard Code:
T/SHPTA 069-2023
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Adhesive
ICS Name:
Adhesives and adhesive products
Publish Date:
2023-12-27
Implement Date:
2024-01-27
Pages:
16 pages
Scope
This document specifies the technical requirements, test methods, inspection rules, packaging, storage, transportation, and marking for reactive polyurethane hot melt adhesives used in automotive interiors.
This document is applicable to reactive polyurethane hot melt adhesives used in automotive interiors, which are made from polyols and polyisocyanates and contain isocyanate groups at their ends.
Development Information
Referenced Standards
GB/T 325.2-2010 Packaging container—Steel drums—Part 2:Removable head(open head)drums with a minimum total capacity of 208L,210L and 216.5L
GB/T 325.4-2015 Packing containers—Steel drums—Part 4:Removable head(open head) drums with a maximum total capacity of 200 L
GB/T 2423.22-2002 Environmental testing for electric and electronic products—Part 2:Test methods Test N:Change of temperature
GB/T 2423.22-2012 Environmental testing—Part 2:Test methods—Test N:Change of temperature
GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products—Test Ca:Damp heat, steady state
GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state
GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state
GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products—Test Db:Damp heat, cyclic
GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle)
GB/T 2790-1995 Adhesives, 180° peel strength test method for a flexible-bonded-to-rigid test specimen assembly
GB/T 3512-2001 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB/T 3512-2014 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB/T 7124-1986 The method for determination of strength properties of adhesive in shear by tension loading(Metal to metal)
GB/T 7124-2008 Adhesives—Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
GB/T 12009.4-1989 Polymethylene polyphenyl isocyanate—Determination of isocyanate content
GB/T 12009.4-2016 Plastics—Aromatic isocyanates for use in the production of polyurethane—Part 4:Determination of isocyanate content
GB/T 20740-2006 Adhesive—Sampling
GB/T 32448-2015 Determination of the heavy metal Pb,Cr,Cd,Ba,Hg,As,Se,Sb dissolved in adhesives
GB/T 33372-2016 Limit of volatile organic compound content in adhesives
GB 33372-2020 Limit of volatile organic compounds content in adhesive
HG/T 3075-2003 The specification for package,mark,transportation and storage of adhesive products
HG/T 3660-1999 Testing Methods for Melt Viscosity of Hot-melt Adhesives
HG/T 3716-2003 Hot-met adhesives-Determining the open time
T/CMIF 12
Related Standards
GB/T 7749-1987
Active
GB/T 7749-1987 Test method of cleavage strength of adhesive (metal to metal)
GB/T 7750-1987
Active
GB/T 7750-1987 Test method of creep properties of adhesive in shear by tension loading (metal to metal)
GB/T 11177-1989
Active
GB/T 11177-1989 Testing method for compressive shear strength of dowel joint by inorganic adhesives
GB/T 12216-1990
Abolished
GB/T 12216-1990 The residue from distillation of synthetic fatty acids as binder for foundry
GB/T 13353-1992
Active