GB 7228-1987
Abolished
GB/Z 163.4-2025
Active
National standards
GB/Z 163.4-2025 High-voltage direct current(HVDC) systems—Guidance to the specification and design evaluation of AC filters—Part 4:Equipment
GB/Z 163.4-2025 High-voltage direct current(HVDC) systems—Guidance to the specification and design evaluation of AC filters—Part 4:Equipment
Price:
$ 108.00
Basic Information
Standard Code:
GB/Z 163.4-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Power semiconductor devices and components
ICS Name:
Rectifiers, converters, and regulated power supplies
Publish Date:
2025-12-03
Implement Date:
1970-01-01
Pages:
72 pages
Scope
This document provides guidance for determining the basic data of AC filters and their components in high-voltage direct current (HVDC) systems, such as steady-state setpoints, transient stress and setpoints, losses, design issues and special applications, protection, audible noise, seismic requirements, equipment design, and test parameters.
This document is applicable to AC-side filters used in high-voltage DC systems with line-commutated converters (LCCs) to suppress harmonic distortion and audible sensitive frequency interference. It is not applicable to filters for power line carrier (PLC) and radio interference spectra. AC filter parameters for high-voltage DC systems based on voltage-source converters (VSCs) are used for reference.
Note: High-voltage DC systems based on voltage-source converters (VSCs) are also known as flexible DC systems.
Development Information
Same series standard
Referenced Standards
GB/T 1094.6-2011 Power transformers—Part 6:Reactors
GB 8287.1-1998 High voltage post insulators of ceramic material Part 1:Technical specification
GB/T 8287.1-2008 Indoor and outdoor post insulators for systems with nominal voltage greater than 1 000 V—Part 1:Test on insulators of ceramic material or glass
GB/T 11024.1-2001 Shunt capacitors for a.c. power systems having a rated voltage above 1kV—Part 1:General—Performance, testing and rating—Safety requirements—Guide for installation and operation
GB/T 11024.1-2010 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V—Part 1:General
GB/T 11024.1-2019 Shunt capacitors for a.c.power systems having a rated voltage above 1 000 V—Part 1:General
GB 11032-2000 Metal oxide surge arresters without gaps for a.c.systems
GB/T 11032-2010 Metal-oxide surge arresters without gaps for a.c. systems
GB/T 11032-2020 Metal-oxide surge arresters without gaps for a.c. systems
GB/T 20840.2-2014 Instrument transformers—Part 2:Additional requirements for current transformers
GB/T 20989-2017 Determination of power losses in high-voltage direct current(HVDC)converter stations
GB/T 28547-2012 Selection and application recommendations of metal oxide surge arresters for a.c.systems
GB/T 28547-2023 Selection and application recommendations of metal oxide surge arresters for a.c. systems
GB/T 30547-2014 Filter resistor for high voltage direct current(HVDC) transmission system
GB/T 30547-2023 Filter resistor for high voltage direct current (HVDC) transmission system
IEC 60099-9
IEEE Std 18
GB/Z 163.1-2025 High-voltage direct current(HVDC)systems—Guidance to the specification and design evaluation of AC filters—Part 1:Overview
Adopt standards
IEC TR 62001-4:2021
Related Standards
GB/T 13422-1992
Replaced
GB/T 13422-1992 Power semiconductor converters Electrical test methods
GB/T 3859.1-1993
Replaced
GB/T 3859.1-1993 Semiconductor convertors—Specification of basic requirements
GB/T 3859.2-1993
Replaced
GB/T 3859.2-1993 Semiconductor convertors—Application guide
GB/T 3859.3-1993
Replaced
GB/T 3859.3-1993 Semiconductor convertors—Transformers and reactors
GB/T 16859-1997
Active