GB/T 2681-1981
Abolished
GB/T 20626.3-2022
Active
National standards
GB/T 20626.3-2022 Specific environmental condition—Electric and electronic products for plateau—Part 3:Protection requirement of lighting,pollution,condensation
GB/T 20626.3-2022 Specific environmental condition—Electric and electronic products for plateau—Part 3:Protection requirement of lighting,pollution,condensation
Price:
$ 66
Basic Information
Standard Code:
GB/T 20626.3-2022
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Basic standards and general methods
ICS Name:
Comprehensive Electrical Engineering
Publish Date:
2022-10-12
Implement Date:
2023-05-01
Pages:
13 pages
Scope
This document specifies the requirements for lightning, pollution, and condensation protection of electrical and electronic products in plateau environments.
This document applies to high- and low-voltage electrical and electronic products used in plateau areas with altitudes above 1,000 m and up to 5,000 m, where the low-voltage electrical appliances and low-voltage complete switchgear and control equipment involved apply to plateau areas with altitudes above 2,000 m and up to 5,000 m.
This document does not apply to communication products.
Development Information
Replace the following standards
Referenced Standards
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 311.1-2012 Insulation co-ordination—Part 1:Definitions,principles and rules
GB/T 311.2-2013 Insulation co-ordination—Part 2:Application guide
GB/T 311.3-2017 Insulation co-ordination—Part 3:Procedures for high-voltage direct current(HVDC) converter stations
GB/T 2900.18-2008 Electrotechnical terminology—Low voltage apparatus
GB/T 4798.2-2021 Classification of environmental conditions—Classification of groups of environmental parameters and their severities—Part 2:Transportation and handling
GB/T 11022-2020 Common specifications for high-voltage alternating-current switchgear and controlgear standards
GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests
GB/T 16935.5-2008 Insulation coordination for equipment within low-voltage systems—Part 5:Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
GB/T 20625-2006 Special environmental condition—Terminology
GB/T 26218.2-2010 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions—Part 2:Ceramic and glass insulators for a.c.systems
DL/T 436-2005
GB/T 2900.1-1992 Electrotechnical terminology—Fundamental terms
GB/T 2900.1-2008 Electrotechnical terminology—Fundamental terms
GB/T 4585-2004 Artificial pollution tests on high-voltage insulators to be used on a.c systems
GB/T 4585-2024 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems
GB/T 4585.1-1984 Artificial pollution tests on high-voltage insulators to be used on a.c.systems Salt-fog method
GB/T 4585.2-1991 Artificial pollution tests on high-voltage insulators to be used on a.c.systems solid-layer method
GB/T 4798.1-1986 Environmental conditions existing in the application of electric and electronic products—Storage
GB/T 4798.1-2005 Environmental conditions existing in the application of electric and electronic products—Section 1:Storage
GB/T 4798.1-2019 Classification of environmental conditions—Classification of groups of environmental parameters and their severities—Part 1:Storage
GB/T 16927.1-1997 High-voltage test techniques Part 1:General test requirements
GB/T 16927.1-2011 High-voltage test techniques—Part 1:General definitions and test requirements
GB/T 17627-2019 High-voltage test techniques for low-voltage equipment—Definitions,test and procedure requirements,test equipment
GB/T 17627.1-1998 High-voltage test techniques for low-voltage equipment—Part 1:Definitions,test and procedure requirements
GB/T 17627.2-1998 High-voltage test techniques for low-voltage equipment—Part 2:Measuring system and test equipment
DL/T 437-2012 High-voltage direct current grounding electrode technology guidelines
DL/T 1533-2016 The method for drawing a lightning zone distribution map for power systems in DL/T 1533-2016
DL 5497-2015 High Voltage Direct Current Transmission Line Design Technical Regulations
JB/T 12066-2014 Guidelines for the selection of the number of disc-type suspended insulators in high-altitude pollution areas
GB/T 50064-2014 Code for design of overvoltage protection and insulation coordination for AC electrical installations
GB/T 50065-2011 Code for design of ac electrical installations earthing
Related Standards
GB/T 2682-1981
Abolished
GB/T 2682-1981 Colors of indicator lights and push-buttons used in electrical assembly devices
GB/T 3926-1983
Replaced
GB/T 3926-1983 Rated voltage for medium frequency equipment
GB/T 4064-1983
Abolished
GB/T 4064-1983 General guide for designing of electrical equipment to satisfy safety requirements
GB/T 4776-1984
Replaced
GB/T 4776-1984 Electrical safety terminology
GB/T 5080.4-1985
Active