GB/T 4011-1983
Replaced
T/SHPTA 067-2023
Active
Group standards
T/SHPTA 067-2023 Polymerization vessel construction regulations
T/SHPTA 067-2023 Polymerization vessel construction regulations
Price:
$ 31.00
Basic Information
Standard Code:
T/SHPTA 067-2023
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Cables and their accessories
ICS Name:
Cable
Publish Date:
2023-12-13
Implement Date:
2024-01-13
Pages:
16 pages
Scope
This document specifies the production conditions, boat design, boat molds, boat materials and usage, boat construction processes, boat construction and quality control, boat assembly, prototype testing, boat testing, storage, safe operation, and labor protection for polyethylene boats. This document applies to open or closed polyethylene boats with a length of ≤6 m, which are manufactured using rotational molding technology (such as polyethylene boats that can navigate in a wave height of 0.5 m in a Class C navigation area, and polyethylene boats that are used in areas with sightseeing areas, navigating in urban areas, reservoirs, parks, scenic areas, etc., to provide passengers with sightseeing, entertainment, dining, and other services).
Development Information
Referenced Standards
GB/T 1033.1-2008 Plastics—Methods for determining the density of non-cellular plastics—Part 1:Immersion method,liquid pyknometer method and titration method
GB/T 1040.2-2022 Plastics—Determination of tensile properties—Part 2:Test conditions for moulding and extrusion plastics
GB/T 1843-1996 Plastics—Determination of izod impact strength
GB/T 1843-2008 Plastics—Determination of izod impact strength
GB/T 2411-1980 Plastics—Shore hardness test
GB/T 2411-2008 Plastics and ebonite—Determination of indentation hardness by means of a durometer(shore hardness)
GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate(MFR)and melt volume-flow rate(MVR)of thermoplastics—Part 1:Standard method
GB/T 9341-2000 Plastics—Determination of flexural properties
GB/T 9341-2008 Plastics—Determination of flexural properties
GB/T 11548-1989 Standard test method for impact resistance of rigid plastic sheeting by means of a tup (falling weight)
GB 18168-2000 Specifications of water amusement equipment category
GB/T 18168-2008 Specifications of water amusement equipment category
GB/T 18168-2017 Specifications of water amusement equipment category
GB/T 24001-2016 Environmental management systems—Requirements with guidance for use
GB/T 39933-2021 Rotational moulding—Test method for low temperature impact
GB/T 45001-2020 Occupational health and safety management systems—Requirements with guidance for use
GB 50034-2013 Standard for lighting design of buildings
HG/T 3839-2006 Testing methods for shear strength of plastics by punch tool
HG/T 4282-2011 Plastic welding specimen tensile testing method
SN/T 1504.2-2017 Food containers and packaging plastic raw materials - Part 2: Determination of antioxidants and erucamide lubricants in polyethylene - Liquid chromatography method
Related Standards
GB/T 4012-1983
Replaced
GB/T 4012-1983 2.6/9.5mm composite coaxial cable for telecommunication use
GB/T 5441.10-1985
Replaced
GB/T 5441.10-1985 Test methods for communication cable—Measurement of actual length of coaxial pair—Sine wave method
GB/T 5441.1-1985
Replaced
GB/T 5441.1-1985 Test methods for communication cable General
GB/T 5441.2-1985
Replaced
GB/T 5441.2-1985 Test methods for communication cable Capacitance test Bridge method
GB/T 5441.3-1985
Replaced