GB 14536.10-1996
Replaced
GB/T 14536.3-2022
Active
National standards
GB/T 14536.3-2022 Automatic electrical controls—Part 3:Particular requirements for thermal motor protectors
GB/T 14536.3-2022 Automatic electrical controls—Part 3:Particular requirements for thermal motor protectors
Price:
$ 84
Basic Information
Standard Code:
GB/T 14536.3-2022
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Control appliances
ICS Name:
Home automation devices
Publish Date:
2022-12-30
Implement Date:
2023-07-01
Pages:
26 pages
Scope
The chapter of GB/T 14536.1-2022 applies to all aspects except the following content. Replacement: This document applies to some evaluation of motor thermal protectors defined in GB/T 14536.1 for household and similar applications, including those used in heating, air conditioning, and similar applications, as well as in enclosed (sealed and semi-sealed) motor compressors. Note: Motor thermal protectors are considered an integrated controller, and their protection function depends on their correct installation and fixation inside or on the surface of the motor, and can only be fully tested in combination with the relevant motor. This dependency is explained by the following points: -- Motor thermal protectors can accurately and reliably detect the heating of the motor winding, solving the problem of excessive temperature in the motor during overload; -- Motor thermal protectors can accurately and reliably detect the current value during motor stall, thereby reducing the response time of the thermal protector and protecting the assembly point from the adverse effects of heat dissipation problems; -- The electromagnetic field of the motor affects the opening action of the motor thermal protector, especially the direction of the arc between the contacts, causing uneven wear of the contact materials and ultimately leading to operational failure. The combined test requirements for enclosed (sealed and semi-sealed) motor compressors and motor thermal protectors are listed in IEC 60335-234. This document applies to motor thermal protectors using NTC or PTC thermistors, with additional requirements included in Appendix J.
Development Information
Same series standard
GB/T 14536.1-2022 Automatic electrical controls—Part 1:General requirements
GB/T 14536.6-2022 Automatic electrical controls—Part 6:Particular requirements for automatic electrical burner control systems
GB/T 14536.10-2022 Automatic electrical controls—Part 10:Particular requirements for temperature sensing control
GB/T 14536.13-2022 Automatic electrical controls—Part 13:Particular requirements for electrically operated door locks
GB/T 14536.15-2022 Automatic electrical controls—Part 15:Particular requirements for humidity sensing control
Replace the following standards
GB/T 14536.3-2008 Automatic electrical controls for household and similar use—Particular requirements for thermal motor protectors
GB/T 14536.5-2008 Automatic electrical controls for household and similar use—Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type
Referenced Standards
GB/T 5169.11-2006 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products
GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests
ISO 16484-2
IEC 60038
IEC 60065:2001
IEC 60068-2-75
IEC 60085
IEC 60099-1
IEC 60112:2003
IEC 60127-1
IEC 60227-1
IEC 60245-1
IEC 60269-1
IEC 60335-1:2010
IEC 60364(所有部分）
IEC 60384-14
IEC 60384-16
IEC 60384-17
IEC 60417(所有部分)
IEC 60423
IEC 60529
IEC 60539(所有部分)
IEC 60664-3:2016
IEC 60664-4
IEC 60695-2-10
IEC 60695-2-11
IEC 60695-10-2
IEC 60738-1
IEC 60738-1-1
IEC 60998-2-2
IEC 60998-2-3
IEC 60999-1
IEC 61000(所有部分)
IEC 61000-3-2
IEC 61000-3-3:2008
IEC 61000-4-2:2008
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
IEC 61000-4-13:2002
IEC 61000-4-28
IEC 61051-1
IEC 61051-2
IEC 61051-2-2
IEC 61058-1
IEC 61210
IEC 61249(所有部分)
IEC 61558-2-6
IEC 61558-2-16
IEC 61643-11
IEC 62151
IEC 62326(所有部分)
IEC 62368-1
IEC 63044-3
CISPR 11
CISPR 14-1:2005
CISPR 22:2008
IEC 60269-3
IEC 60335-2-34:2012
Adopt standards
IEC 60730-2-22:2014
Related Standards
GB 14536.11-1996
Replaced
GB 14536.11-1996 Automatic electrical controls for household and similar use—Particular requirements for electrically operated motor starting relays
GB 14536.12-1996
Replaced
GB 14536.12-1996 Automatic electrical controls for household and similar use—Particular requirements for energy regulators
GB 14536.13-1996
Replaced
GB 14536.13-1996 Automatic electrical controls for household and similar use Particular requirements for electrically operated door locks
GB 14536.2-1996
Abolished
GB 14536.2-1996 Automatic electrical controls for household and similar use Particular requirements for electrical controls for electrical household appliances
GB 14536.3-1996
Replaced