GB/T 755-2019 Replaced National standards

GB/T 755-2019 Rotating electrical machines—Rating and performance

Publish Date: 2019-12-10 Implement Date: 2020-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 138

Download

Basic Information

Standard Code: GB/T 755-2019

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Rotating motor

ICS Name: Rotating motor comprehensive

Publish Date: 2019-12-10

Implement Date: 2020-07-01

Pages: 60 pages

Scope

This standard applies to all rotating motors, except those specified in other national standards and IEC standards, such as IEC 60349.
Motors within the scope of this standard may also meet the requirements of other national standards and IEC standards that have been replaced, modified, or supplemented, such as IEC 60079 and IEC 60092.
Note: If certain provisions of this standard need to be modified for special purposes, such as radiation-resistant motors or aerospace motors, all other provisions will still be valid when they can be applied.

Development Information

Word Count: 108 Thousand words Pages: 60 pages

Replace the following standards

GB/T 755-2008 Rotating electrical machines—Rating and performance

Superseded by the following standards

GB/T 755-2025 Rotating electrical machines—Rating and performance

Referenced Standards

GB/T 2900.25-2008 Electrotechnical terminology—Rotating electrical machines GB/T 21210-2016 Starting performance of single-speed three-phase cage induction motors IEC 60027-1 IEC 60027-4 IEC 60034-2(所有部分) IEC 60034-3 IEC 60034-5 IEC 60034-6 IEC 60034-8 IEC 60034-15 IEC 60034-18(所有部分) IEC 60034-18-41 IEC TS 60034-25 IEC 60034-29 IEC 60034-30(所有部分) IEC 60038 IEC 60060-1 IEC 60072(所有部分) IEC 60085 IEC 60204-1 IEC 60204-11 IEC 60335-1:2010 IEC 60445 IEC 60664-1 IEC 61148 IEC 61293 CISPR 11 CISPR 14(所有部分) CISPR 16(所有部分)

Adopt standards

IEC 60034-1:2017

Related Standards

GB/T 7346-1998 Replaced

GB/T 7346-1998 Basic outline constructional type for control motors and feedback components

Publish Date: 1998-01-19

GB/T 4772.1-1999 Replaced

GB/T 4772.1-1999 Dimensions and output series for rotating electrical machines—Part 1:Frame numbers 56 to 400 and flange numbers 55 to 1080

Publish Date: 1999-02-26

GB/T 4772.2-1999 Active

GB/T 4772.2-1999 Dimensions and output series for rotating electrical machines— Part 2:Frame numbers 355 to 1000 and flange numbers 1180 to 2360

Publish Date: 1999-02-26

GB/T 4772.3-1999 Active

GB/T 4772.3-1999 Dimensions and output series for rotating electrical machines— Part 3:Samll built-in motors flange numbers BF10 to BF50

Publish Date: 1999-02-26

GB 10068-2000 Replaced

GB 10068-2000 Mechanical vibration of certain machines with shaft heights 56mm and higher—Measurement,evaluation and limits of vibration

Publish Date: 2000-01-03

GB/T 17948.1-2000 Replaced

GB/T 17948.1-2000 Rotating electrical machines—Functional evaluation of insulation systems—Test procedures for wire-wound windings—Thermal evaluation and classification

Publish Date: 2000-01-03