GB/T 16762-1997
Replaced
GB/T 17101-2026
Pending
National standards
GB/T 17101-2026 Hot-dip zinc or zinc-base-alloy coated steel wires for bridge cables
GB/T 17101-2026 Hot-dip zinc or zinc-base-alloy coated steel wires for bridge cables
Price:
$ 50.00
Basic Information
Standard Code:
GB/T 17101-2026
Standard Type:
National standards
Standard Status:
Pending
is_force_gb:
no
CCS Name:
Wire, steel wire rope
ICS Name:
Wire, steel wire rope, and link chains
Publish Date:
2026-03-31
Implement Date:
2026-10-01
Pages:
24 pages
Scope
This document specifies the classification and marking of hot-dip galvanized or zinc-based alloy steel wires used in bridge cables, the content of orders, technical requirements, test methods, inspection rules, packaging, marking, and quality certificates.
This document is applicable to hot-dip galvanized or zinc-based alloy steel wires (hereinafter referred to as "steel wires") used in bridge cable structures, and can also be used in hot-dip galvanized or zinc-based alloy steel wires used in stress-bearing buildings and other civil engineering cable structures.
Development Information
Replace the following standards
Referenced Standards
GB/T 238-2002 Metallic materials—Wire—Reverse bend test
GB/T 238-2013 Metallic materials—Wire—Reverse bend test
GB/T 239.1-2012 Metallic materials—Wire—Part 1:Simple torsion test
GB/T 239.1-2023 Metallic materials—Wire—Part 1:Simple torsion test
GB/T 470-1997 Zinc ingots
GB/T 470-2008 Zinc ingots
GB/T 1839-2003 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 1839-2008 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 1839-2025 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 2103-2008 General requirements for acceptance,packing,marking and quality certification of steel wire
GB/T 2972-1991 Zinc-coated steel wire—Test method for uniformity of zinc coating on wire by the copper sulphate dip
GB/T 2972-2016 Test method for uniformity of zinc coating on zinc-coated steel wire by the copper sulphate dip
GB 2976-1988 Metallic materials—Wire—Wrapping test
GB/T 2976-2004 Metallic materials—Wire—Wrapping test
GB/T 2976-2020 Metallic materials—Wire—Wrapping test
GB/T 8170-1987 Rules for rounding off of numberical values
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 21839-2008 Steel for prestressed concrete—Test methods
GB/T 21839-2019 Test methods of steel for prestressing concrete
GB/T 24514-2009 Zinc and/or aluminium based coatings on steel—Determination of coating mass per unit area and chemical composition—Gravimetry,inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
GB/T 40342-2021 Method for determination of aluminum content in hot dipped zinc-aluminum alloy coating on steel wire
YB/T 4264-2020 Bridge cable strand for wire rope
YB/T 4264-2011 Hot-rolled wire rod for bridge cable strands
YB/T 6289-2024 YB/T 6289-2024: Determination of aluminum and magnesium content in zinc alloy coating by inductively coupled plasma atomic emission spectroscopy
YS/T 310-1995 Zinc alloy for hot dip galvanizing
YS/T 310-2008 Zinc alloy ingot for hot dip galvanizing
YS/T 310-2021 Galvanized Zinc Alloy Ingots for Hot Dipping
Adopt standards
ISO 19203:2018
Related Standards
GB/T 342-1997
Replaced
GB/T 342-1997 Dimension shape mass and tolerance for cold-drawn round square and hexagonal steel wires
MT 244.1-1997
Replaced
MT 244.1-1997 Car coupler of decauville for mine connecting chain
MT 244.2-1997
Replaced
MT 244.2-1997 Car coupler of decauville for mine—Connecting bolt
MT 716-1997
Replaced
MT 716-1997 Delivery requirements of wire ropes for mine hoisting
MT 717-1997
Active