GB/T 18244-2000
Replaced
T/CECS 10351-2023
Active
Group standards
T/CECS 10351-2023 Inorganic Mineral Floor Paint
T/CECS 10351-2023 Inorganic Mineral Floor Paint
Price:
$ 38.00
Basic Information
Standard Code:
T/CECS 10351-2023
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Roofing and paving waterproofing and moistureproof materials
ICS Name:
Waterproof
Publish Date:
2023-12-18
Implement Date:
2024-05-01
Pages:
20 pages
Scope
This document specifies the classification and marking of inorganic mineral floor coatings, technical requirements, describes the corresponding test methods, establishes inspection rules, and stipulates the contents of marking, packaging, transportation, storage, and user manuals, etc.
This document is applicable to the production and inspection of water-based inorganic mineral floor coatings that are used on concrete, mortar, and other substrates and are flame-resistant and environmentally friendly.
Development Information
Referenced Standards
GB/T 1725-2007 Paints,varnishes and plastics—Determination of non-volatile-matter content
GB/T 1728-2020 Determination of drying time of coating and putty films
GB/T 1733-1993 Determination of resistance to water of films
GB/T 1741-2007 Test method for determining the resistance of paints film to mold
GB/T 1741-2020 Test method for determining the resistance of paints film to mold
GB/T 1766-1995 Paint and varnish—Rating schemes of degradation of coats
GB/T 1766-2008 Paints and varnishes—Rating schemes of degradation of coats
GB/T 1768-2006 Paints and varnishes—Determination of resistance to abrasion—Rotating abrasive rubber wheel method
GB/T 1865-2009 Paints and varnishes—Artificial weathering and exposure to artificial radiation—Exposure to filtered xenon-arc radiation
GB/T 4100-2015 Ceramic tiles
GB/T 5206-2015 Paints and varnishes—Terms and definitions
GB 6566-2010 Limits of radionuclides in building materials
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
GB/T 6739-1996 Determination of film hardness by pencil test
GB/T 6739-2006 Paints and varnishes—Determination of film hardness by pencil test
GB/T 6739-2022 Paints and varnishes—Determination of film hardness by pencil test
GB/T 8170-1987 Rules for rounding off of numberical values
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values
GB 8624-1997 Classification on burning behaviors for building materials
GB 8624-2006 Classification for burning behavior of building materials and products
GB 8624-2012 Classification for burning behavior of building materials and products
GB/T 9271-1988 Paints and varnishes—Standard panels for testing
GB/T 9271-2008 Paints and varnishes—Standard panels for testing
GB/T 9274-1988 Paints and varnishes—Determination of resistance to liquids
GB 9278-1988 Temperatures and humidities for conditioning and testing of paint specimens
GB/T 9278-2008 Temperatures and humidities for conditioning and testing of paint specimens
GB/T 9345.1-2008 Plastics—Determination of ash—Part 1:General methods
GB/T 9750-1998 Marks for package of coating products
GB/T 9755-2014 Synthetic resin emulsion coatings for exterior wall
GB/T 13491-1992 General rule for packing of coatings
GB/T 22374-2018 Floor coatings
GB/T 23986.2-2023 Paints and varnishes—Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds(SVOC) content—Part 2:Gas-chromatographic method
GB/T 23990-2009 Determination of the contents of benzene,toluene,ethylbenzene and xylene in coatings by gas chromatography
GB/T 23993-2009 Determination of formaldehyde content of waterborne coatings—Spectrophtometric method with acetylacetone
GB/T 27761-2011 Standard test method of mass loss and residue measurement validation of thermogravimetric analyzers
GB 30981-2014 Limit of harmful substances of anticorrosion coatings for construction steel structure
GB 30981-2020 Limit of harmful substances of industrial protective coatings
GB/T 33047.1-2016 Plastics—Thermogravimetry(TG)of polymers—Part 1:General principles
GB 38468-2019 Limit of harmful substances of interior floor coatings
JC/T 412.1-2018 Fiber cement sheet - Part 1: Asbestos-free fiber cement sheet
JC/T 547-2017 ceramic tile adhesive
JC/T 547-2005 Ceramic wall and floor tiles adhesive
SJ/T 11294-2018 General specification of floor coating for electrostatic protection
GB 30981.1-2025 Limit of harmful substances of coatings—Part 1:Architectural coatings
GB 30981.2-2025 Limit of harmful substances of coatings—Part 2:Industrial coatings
GB/T 9750-2025 General rules for packaging,labelling,transport and storage of coating material and pigment products
GB/T 33047.1-2025 Plastics—Thermogravimetry(TG) of polymers—Part 1:General principles
GB 8624-2025 Classification for burning behavior of building materials and products
Related Standards
GB/T 19889.7-2005
Replaced
GB/T 19889.7-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 7:Field measurements of impact sound insulation of floors
GB/T 19889.1-2005
Replaced
GB/T 19889.1-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 1:Requirements for laboratory test facilities with suppressed flanking transmission
GB/T 19889.2-2005
Abolished
GB/T 19889.2-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 2:Determination,verification and application of precision data
GB/T 19889.3-2005
Replaced
GB/T 19889.3-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 3:Laboratory measurements of airborne sound insulation of building elements
GB/T 19889.4-2005
Replaced