GB/T 13663-2000
Replaced
GB/T 10002.2-2023
Active
National standards
GB/T 10002.2-2023 Unplasticized poly(vinyl chloride)(PVC-U)fittings for water supply
GB/T 10002.2-2023 Unplasticized poly(vinyl chloride)(PVC-U)fittings for water supply
Price:
$ 122
Basic Information
Standard Code:
GB/T 10002.2-2023
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Plastic profiles
ICS Name:
Plastic pipes, fittings, and valves
Publish Date:
2023-09-07
Implement Date:
2024-04-01
Pages:
41 pages
Scope
This document specifies the materials, product classification, requirements, system applicability, inspection rules, marking, packaging, transportation, and storage of hard polyvinyl chloride (PVC-U) pipe fittings (hereinafter referred to as "pipe fittings") made from PVC-U compounding materials by injection molding and pipe bending. It also describes the test methods.
This document applies to hard PVC-U piping systems for indoor or outdoor buried water supply with a water temperature not exceeding 45℃, including general-purpose pressure water transmission and drinking water distribution. It also applies to pressure drainage piping systems.
Note 1: The pressure reduction coefficient between 0℃ and 45℃ is provided in Appendix A of GB/T 10002.1-2023.
Note 2: It is the responsibility of the purchaser to select the products specified in this document appropriately according to their specific application needs and in combination with relevant laws, standards, or regulatory requirements.
Development Information
Same series standard
Referenced Standards
GB/T 10002.1-2023 Unplasticized poly (vinyl chloride) (PVC-U) pipes for water supply
GB/T 1033.1-2008 Plastics—Methods for determining the density of non-cellular plastics—Part 1:Immersion method,liquid pyknometer method and titration method
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2918-1998 Plastics—Standard atmospheres for conditioning and testing
GB/T 2918-2018 Plastics—Standard atmospheres for conditioning and testing
GB/T 4615-1984 Determination method of residual vinyl chloride monomer contents in polyvinyl chloride
GB/T 4615-2008 Poly(vinyl chloride)—Determination of residual vinyl chloride monomer content—Gas chromatographic method
GB/T 4615-2013 Poly(vinyl chloride)—Determination of residual vinyl chloride monomer—Gas-chromatographic method
GB/T 5761-1993 Suspension polyvinyl chloride resins of general purpose
GB/T 5761-2006 Suspension polyvinyl chloride resins of general purpose
GB/T 5761-2018 Suspension polyvinyl chloride resins of general purpose
GB/T 6111-2003 Thermoplastics pipes for the conveyance of fluids-Resistance to internal pressure—Test method
GB/T 6111-2018 Thermoplastics piping systems for the conveyance of fluids—Determination of the resistance to internal pressure
GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 1:Parallel internal and taper external threads
GB/T 7306.2-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 2:Taper internal and external threads
GB/T 8801-2007 Test method for unplasticized polyvinyl chloride(PVC-U)fittings by falling
GB/T 8802-2001 Thermoplastics pipes and fitting-Determination of vicat softening temperature
GB/T 8803-2001 Injection-moulded unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C),acrylonitrile butadiene-styrene(ABS)and acrylonitrile-styrene-acrylester(ASA)fittings—Hot oven test method
GB/T 8806-2008 Plastics piping systems—Plastics components—Determination of dimensions
GB/T 17219-1998 Standard for safety evaluation of equipment and protective materials in drinking water system
GB/T 19278-2003 General terms and their definitions of thermoplastic pipes, fittings and valves
GB/T 19278-2018 General terms and their definitions of thermoplastic pipes,fittings and valves
GB/T 19471.1-2004 Plastics piping systems—Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride)(PVC-U)pipes—Test method for leaktighness under internal pressure and angular deflection
GB/T 19471.2-2004 Plastics piping systems—Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride)(PVC-U)for use with PVC-U pipes—Test method for leaktightness under negative pressure
GB/T 21300-2007 Plastics pipes and fittings—Determination of opacity
QB/T 2568-2002 Adhesive for solvent-based PVC-U plastic pipe system
GB/T 8806-1988 Method for dimension measuring of plastic pipes
GB/T 17219-2025 Hygienic safety evaluation of distribution equipment,protective materials and treatment materials in drinking water system
Related Standards
GB/T 18251-2000
Replaced
GB/T 18251-2000 Method for the assessment of pigment or carbon black dispersion in polyolefin pipes,fittings and compounds
GB/T 18252-2000
Replaced
GB/T 18252-2000 Plastics piping and ducting systems—Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
GB/T 18477-2001
Replaced
GB/T 18477-2001 Unplasticized polyvinyl chloride(PVC-U) double wall corrugated pipes for underground soil, waste and drainage
GB/T 18742.1-2002
Replaced
GB/T 18742.1-2002 Polypropylene piping systems for hot and cold water installations—Part 1:General
GB/T 18742.2-2002
Replaced