GB/T 29463.3-2012 Replaced National standards

GB/T 29463.3-2012 Gaskets used in tube-shell heat exchangers—Part 3:Nonmetallic gaskets

GB/T 29463.3-2012 Gaskets used in tube-shell heat exchangers—Part 3:Nonmetallic gaskets

Publish Date: 2012-12-31 Implement Date: 2013-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 29463.3-2012

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Sealing and sealing devices

ICS Name: Seals, sealing devices

Publish Date: 2012-12-31

Implement Date: 2013-07-01

Pages: 10 pages

Scope

This part of GB/T 29463 specifies the structural types and dimensions of non-metallic soft gaskets.
This part is applicable to non-metallic soft gaskets used in shell-and-tube heat exchangers with a design pressure of 0.25 MPa to 4.0 MPa and a design temperature of -20 ℃ to 350 ℃.

Development Information

Word Count: 17 Thousand words Pages: 10 pages

Same series standard

GB/T 29463.1-2012 Gaskets used in tube-shell heat exchangers—Part 1:Metallic jacketed gaskets GB/T 29463.2-2012 Gaskets used in tube-shell heat exchangers—Part 2:Spiral wound gasket

Superseded by the following standards

GB/T 29463-2023 Gaskets used in tube-shell heat exchangers

Referenced Standards

JB/T 4701 JB/T 4703 QB/T 3628 GB 151-1999 Tubular heat exchangers GB/T 151-2014 Heat exchangers GB/T 539-1995 Oil-resisting asbestos-rubber sheets GB/T 539-2008 Oil-resisting compressed asbestos fibre jointing GB/T 3985-1995 Asbestos-rubber sheets GB/T 3985-2008 Compressed asbestos fibre jointing GB/T 151-2026 Heat exchangers GB/Z 151-2026 Fire prevention measures on converters for high-voltage direct current(HVDC)systems,static var compensators(SVC)and flexible AC transmission systems(FACTS)and their valve halls

Related Standards

GB/T 5894-1986 Replaced

GB/T 5894-1986 The terms of mechanical seal

Publish Date: 1986-03-01

GB/T 6656-1986 Replaced

GB/T 6656-1986 DC ferrite permanent magnet motors

Publish Date: 1986-08-05

GB/T 9877.1-1988 Replaced

GB/T 9877.1-1988 Rotary shaft lip seals—Design criteria for standard applications—Part 1:rubber covered rotary shaft lip seals

Publish Date: 1988-09-20

GB/T 9877.2-1988 Replaced

GB/T 9877.2-1988 Rotary shaft lip seals—Design criteria for standard applications—Part 2:metal cased rotary shaft lip seals

Publish Date: 1988-09-20

GB/T 9877.3-1988 Replaced

GB/T 9877.3-1988 Rotary shaft lip seals—Design criteria for standard applications—Part 3:assembled rotary shaft lip seals

Publish Date: 1988-09-20

GB 13871-1992 Replaced

GB 13871-1992 Rotary shaft lip type seals—Nominal dimensions and tolerances

Publish Date: 1992-12-12