GB/T 29463.1-2012 Replaced National standards

GB/T 29463.1-2012 Gaskets used in tube-shell heat exchangers—Part 1:Metallic jacketed gaskets

GB/T 29463.1-2012 Gaskets used in tube-shell heat exchangers—Part 1:Metallic jacketed gaskets

Publish Date: 2012-12-31 Implement Date: 2013-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 29463.1-2012

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Sealing and sealing devices

ICS Name: Seals, sealing devices

Publish Date: 2012-12-31

Implement Date: 2013-07-01

Pages: 11 pages

Scope

This part of GB/T 29463 specifies the structural types and dimensions of metal-encased gaskets for shell-and-tube heat exchangers.
This part is applicable to metal-encased gaskets for shell-and-tube heat exchangers with a design pressure of 0.25 MPa to 64 MPa and a design temperature of -20 °C to 450 °C.

Development Information

Word Count: 19 Thousand words Pages: 11 pages

Same series standard

GB/T 29463.2-2012 Gaskets used in tube-shell heat exchangers—Part 2:Spiral wound gasket GB/T 29463.3-2012 Gaskets used in tube-shell heat exchangers—Part 3:Nonmetallic gaskets

Superseded by the following standards

GB/T 29463-2023 Gaskets used in tube-shell heat exchangers

Referenced Standards

GB 151-1999 Tubular heat exchangers GB/T 151-2014 Heat exchangers GB/T 232-1999 Metallic materials—Bend test GB/T 232-2010 Metallic materials—Bend test GB/T 232-2024 Metallic materials—Bend testing method GB/T 539-1995 Oil-resisting asbestos-rubber sheets GB/T 539-2008 Oil-resisting compressed asbestos fibre jointing GB/T 710-1991 Hot-rolled quality carbon structural steel sheets and strips GB/T 710-2008 Hot-rolled quality carbon structural steel sheets and strips GB/T 2040-2002 Sheet of copper and copper alloy GB/T 2040-2008 Sheet of copper and copper alloy GB/T 2040-2017 Copper and copper alloy sheet GB/T 2518-1988 Continual hot-dip zinc-coated steel sheets and strips GB/T 2518-2004 Continuous hot-dip zinc-coated steel sheets and strips GB/T 2518-2008 Continuously hot-dip zinc-coated steel sheet and strip GB/T 2518-2019 Continuously hot-dip zinc and zinc alloy coated steel sheet and strip GB/T 2520-2000 Cold-reduced electrolytic tinplate GB/T 2520-2008 Cold-reduced electrolytic tinplate GB/T 2520-2017 Cold-reduced electrolytic tinplate GB/T 3003-2006 Refractory—Ceramic fibre and the products GB/T 3003-2017 Refractory fibres and the products GB/T 3280-1992 Cold rolled stainless steel sheets and plates GB/T 3280-2007 Cold rolled stainless steel plate, sheet and strip GB/T 3280-2015 Cold rolled stainless steel plate, sheet and strip GB/T 3880-1997 Aluminium and aluminium alloy rolled sheet GB/T 3880.1-2006 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 1:Technical conditions of delivery GB/T 3880.1-2012 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 1:Technical conditions of delivery GB/T 3880.1-2023 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 1:Technical conditions of delivery GB/T 3880.2-2006 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 2:Mechanical properties GB/T 3880.2-2012 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 2:Mechanical properties GB/T 3880.2-2024 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 2:Mechanical properties GB/T 3880.3-2006 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 3:Tolerances on forms and dimensions GB/T 3880.3-2012 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 3:Tolerances on forms and dimensions GB/T 3880.3-2024 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 3:Tolerances on forms and dimensions GB/T 3985-1995 Asbestos-rubber sheets GB/T 3985-2008 Compressed asbestos fibre jointing JB/T 7758.2-2005 JBT 7758.2-2005 Flexible Graphite Sheet - Technical Specification JB/T 7758.2-1995 Flexible graphite sheet technical specifications GB/T 151-2026 Heat exchangers GB/Z 151-2026 Fire prevention measures on converters for high-voltage direct current(HVDC)systems,static var compensators(SVC)and flexible AC transmission systems(FACTS)and their valve halls

Related Standards

GB/T 5894-1986 Replaced

GB/T 5894-1986 The terms of mechanical seal

Publish Date: 1986-03-01

GB/T 6656-1986 Replaced

GB/T 6656-1986 DC ferrite permanent magnet motors

Publish Date: 1986-08-05

GB/T 9877.1-1988 Replaced

GB/T 9877.1-1988 Rotary shaft lip seals—Design criteria for standard applications—Part 1:rubber covered rotary shaft lip seals

Publish Date: 1988-09-20

GB/T 9877.2-1988 Replaced

GB/T 9877.2-1988 Rotary shaft lip seals—Design criteria for standard applications—Part 2:metal cased rotary shaft lip seals

Publish Date: 1988-09-20

GB/T 9877.3-1988 Replaced

GB/T 9877.3-1988 Rotary shaft lip seals—Design criteria for standard applications—Part 3:assembled rotary shaft lip seals

Publish Date: 1988-09-20

GB 13871-1992 Replaced

GB 13871-1992 Rotary shaft lip type seals—Nominal dimensions and tolerances

Publish Date: 1992-12-12