GB/T 16935.3-2016 Replaced National standards

GB/T 16935.3-2016 Insulation coordination for equipment within low-voltage systems— Part 3:Use of coating,potting or moulding for protection against pollution

Publish Date: 2016-04-25 Implement Date: 2016-11-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 16935.3-2016

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Low-voltage electrical equipment

ICS Name: Electric devices

Publish Date: 2016-04-25

Implement Date: 2016-11-01

Pages: 20 pages

Scope

This part of GB/T 16935 applies to components protected against corrosion by coatings, tank sealing, and molding. The electrical clearance and creepage distance of such components may be less than those specified in Part 1 or Part 5.

Development Information

Word Count: 34 Thousand words Pages: 20 pages

Same series standard

GB/Z 16935.6-2016 Insulation coordination for equipment within low-voltage systems—Part 2-2:Interface considerations—Application guide

Replace the following standards

GB/T 16935.3-2005 Insulation coordination for equipment within low-voltage systems—Part 3:Use of coating,potting or moulding for protection against pollution

Superseded by the following standards

GB/T 16935.3-2025 Insulation coordination for equipment within low-voltage systems—Part 3:Use of coating,potting or moulding for protection against pollution

Referenced Standards

GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state GB/T 2423.22-2012 Environmental testing—Part 2:Test methods—Test N:Change of temperature GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests GB/T 16935.5-2008 Insulation coordination for equipment within low-voltage systems—Part 5:Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm IEC 60326-2:1990 IEC 60454-3-1:1998 修改单1(2001) IEC 61189-2:2006 IEC 61189-3:2007 IEC 61249-2(所有部分) IEC导则104:2004

Adopt standards

IEC 60664-3:2010(第2.1版)

Related Standards

GB/T 4876-1985 Abolished

GB/T 4876-1985 Line-charging current switching tests for a.c. high-voltage circuit-breaker

Publish Date: 1985-01-28

GB/T 13137-1991 Abolished

GB/T 13137-1991 Specification for 12-channel telephone carrier terminal equipment used on the symmetric pains of 2.6/9.5mm coaxial cable

Publish Date: 1991-08-15

GB/T 16316-1996 Active

GB/T 16316-1996 Specification for conduit fittings for electrical installations—Part 1:General requirements

Publish Date: 1996-05-20

GB 16926-1997 Replaced

GB 16926-1997 High—voltage alternating current switch-fuse combinations

Publish Date: 1997-07-28

GB/T 16935.1-1997 Replaced

GB/T 16935.1-1997 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests

Publish Date: 1997-07-30

GB/T 16895.4-1997 Replaced

GB/T 16895.4-1997 Electrical installations of buildings Part 5:Selection and erection of electrical equipment Chapter 53:Switchgear and control gear

Publish Date: 1997-12-26