GB/T 10183.1-2010 Replaced National standards

GB/T 10183.1-2010 Cranes—Tolerances for wheels and travel and traversing tracks—Part 1:Genera

GB/T 10183.1-2010 Cranes—Tolerances for wheels and travel and traversing tracks—Part 1:Genera

Publish Date: 2011-01-10 Implement Date: 2011-06-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 10183.1-2010

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Cranes

ICS Name: Crane

Publish Date: 2011-01-10

Implement Date: 2011-06-01

Pages: 21 pages

Scope

This part of GB/T 10183 specifies the tolerances for cranes and their tracks during installation and operation, as defined in GB/T 6974.1. The purpose of these requirements is to eliminate overloading caused by normal dimensional or geometrical deviations of the structure, thereby improving the operational safety of cranes and ensuring that all components reach their expected lifespan.
The tolerances specified in this part are all limit values. Elastic deformation caused by load effects is not included. To meet the predetermined performance requirements, it is necessary to consider these elastic deformations at the design stage using other design criteria.
The specific tolerance values for specific types of cranes are specified in other parts of GB/T 10183.

Development Information

Word Count: 35 Thousand words Pages: 21 pages

Same series standard

GB/T 10183.4-2010 Cranes—Tolerances for wheels and travel and traversing tracks—Part 4:Jib Cranes

Replace the following standards

GB/T 10183-2005 Cranes—Overhead travelling cranes and portal bridge cranes—Tolerances for cranes manufacture and tracks laying

Superseded by the following standards

GB/T 10183.1-2018 Cranes—Tolerances for wheels and travel and traversing tracks—Part 1:General

Referenced Standards

GB/T 1182-1996 Geometrical tolerancing—Generalities, definitions, symbols, indications on drawings GB/T 1182-2008 Geometrical Product Specifications(GPS)—Geometrical tolerancing—Tolerances of form, orientation, location and run-out GB/T 1182-2018 Geometrical product specifications(GPS)—Geometrical tolerancing—Tolerances of form,orientation,location and run-out GB/T 1800.2-1998 Limits and fits—Bases—Part 2:Basic rules of tolerances, deviations and fits GB/T 1800.2-2009 Geometrical Product Specifications (GPS)—Limits and fits—Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts GB/T 1800.2-2020 Geometrical product specifications(GPS)—ISO code system for tolerances on linear sizes—Part 2:Tables of standard tolerance classes and limit deviations for holes and shafts GB/T 6974.1-1986 Lifting appliances—Vocabulary—Types of lifting appliances GB/T 6974.1-2008 Cranes—Vocabulary—Part 1:General

Adopt standards

ISO 12488-1:2005

Related Standards

GB/T 3811-1983 Replaced

GB/T 3811-1983 Design rules for cranes

Publish Date: 1983-08-03

GB/T 6067-1985 Replaced

GB/T 6067-1985 Safety rules for lifting appliances

Publish Date: 1985-06-06

GB/T 5905-1986 Replaced

GB/T 5905-1986 Cranes—Test code and procedures

Publish Date: 1986-03-03

GB/T 6974.10-1986 Replaced

GB/T 6974.10-1986 Lifting appliances—Vocabulary—Portal slewing cranes

Publish Date: 1986-11-01

GB/T 6974.11-1986 Replaced

GB/T 6974.11-1986 Lifting appliances—Vocabulary—Derrick cranes

Publish Date: 1986-11-01

GB/T 6974.1-1986 Replaced

GB/T 6974.1-1986 Lifting appliances—Vocabulary—Types of lifting appliances

Publish Date: 1986-11-01