GB/T 18451.1-2012 Replaced National standards

GB/T 18451.1-2012 Wind turbine generator systems—Design requirements

GB/T 18451.1-2012 Wind turbine generator systems—Design requirements

Publish Date: 2012-05-11 Implement Date: 2012-10-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 18451.1-2012

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Wind energy

ICS Name: Wind power generation systems and other energy sources

Publish Date: 2012-05-11

Implement Date: 2012-10-01

Pages: 67 pages

Scope

This standard specifies the necessary design requirements to ensure the integrity of wind turbine systems. Its purpose is to provide an appropriate level of protection during the expected lifespan of wind turbines to prevent damage to them from various hazards.
This standard applies to various subsystems of wind turbines, such as control and protection devices, internal electrical systems, mechanical systems, and support structures.
This standard is applicable to wind turbines of all capacities. For small wind turbines, the standard IEC 61400-2 can be used.
This standard should be used in conjunction with the IEC, ISO, and national standards mentioned in Chapter 2.

Development Information

Word Count: 124 Thousand words Pages: 67 pages

Same series standard

GB/T 18451.2-2012 Power performance measurements of electricity producing wind turbines

Replace the following standards

GB 18451.1-2001 Wind turbine generator systems—Safety requirements

Superseded by the following standards

GB/T 18451.1-2022 Wind energy generation systems—Design requirements

Referenced Standards

GB/T 4662-2003 Rolling bearings—Static load ratings GB 5226.3-2005 Safety of machinery—Electrical equipment of machines—Part 11:Requirements for HV equipment for voltages above 1 000 Va.c. or 1 500 Vd.c. and not exceeding 36 kV GB/T 16895.3-2004 Electrical installations of buildings—Part 5-54:Selection and erection of electrical equipment-Earthing arrangements, protective conductors and protective bonding conductors GB/T 17799.1-1999 Electromagnetic compatibility—Generic standards—Immunity for residential, commercial and light-industrial environments GB/T 17799.2-2003 Electromagnetic compatibility—Generic standards—Immunity for industrial environments GB 17799.4-2001 Electromagnetic compatibility—Generic standards—Emission standard for industrial environments GB/T 19001-2008 Quality management systems—Requirements GB/T 19271.1-2003 Protection against lightning electromagnetic impulse—Part 1:General principles GB/T 20320-2006 Measurement and assessment of power quality characteristics of wind turbine generator system IEC 60204-1:1997 IEC 60364（所有部分) IEC 60721-2-1:2002 IEC 61024-1:1990 IEC 61400-24: 2002 ISO 281:1990 ISO 2394:1998 ISO 2533:1975 ISO 4354:2009 ISO 6336(所有部分)

Adopt standards

IEC 61400-1:2005

Related Standards

GB 17646-1998 Replaced

GB 17646-1998 Safety of small wind turbine generator systems

Publish Date: 1998-12-21

GB 18451.1-2001 Replaced

GB 18451.1-2001 Wind turbine generator systems—Safety requirements

Publish Date: 2001-09-15

GB/T 2900.53-2001 Active

GB/T 2900.53-2001 Electrotechnical terminology—Wind turbine generator systems

Publish Date: 2001-09-15

GB/T 18709-2002 Active

GB/T 18709-2002 Methodology of wind energy resource measurement for wind farm

Publish Date: 2002-04-28

GB/T 18710-2002 Active

GB/T 18710-2002 Methodology of wind energy resource assessment for wind farm

Publish Date: 2002-04-28

GB/T 4750-2002 Replaced

GB/T 4750-2002 Collection of standard design drawings for household anerobie digesters

Publish Date: 2002-07-02