GB/T 15340-1994 Rubber, raw, natural and synthetic Sampling and further preparative procedures

GB/T 15340-2008 Rubber, raw natural and raw synthetic—Sampling and further preparative procedures

GB/T 8087 GB/T 1232.1-2000 Rubber,unvulcanized—Determinations using a shearing-disc viscometer—Part 1:Determination of Mooney viscosity GB/T 1232.1-2016 Rubber,unvulcanized—Determinations using a shearing-disc viscometer—Part 1:Determination of Mooney viscosity GB/T 1232.3-2021 Rubber,unvulcanized—Determinations using a shearing-disc viscometer—Part 3:Determination of the Delta Mooney value for non-pigmented,oil-extended emulsion-polymerized SBR GB/T 1232.4-2017 Rubber,unvulcanized—Determinations using a shearing-disc viscometer—Part 4:Determination of the Mooney stress-relaxation rate GB/T 6038-1993 Rubber test mixes—Preparation, mixing and vulcanization—Equipment and procedures GB/T 6038-2006 Rubber test mixes—Preparation,mixing and vulcanization—Equipment and procedures GB/T 6378-2002 Sampling procedures and charts for inspection by variables for percent nonconforming(Applied to inspection of successive lots or batches) GB/T 6378.1-2008 Sampling procedures for inspection by variables—Part 1:Specification for single sampling plans indexed by acceptance quality limit(AQL)for lot-by-lot inspection for a single quality characteristic and a single AQL GB/T 6378.4-2008 Sampling procedures for inspection by variables—Part 4:Procedures for assessment of declared quality levels for mean GB/T 6378.4-2018 Sampling procedures for inspection by variables—Part 4:Procedures for assessment of declared quality levels for mean GB/T 6378.7-2024 Sampling procedures for inspection by variables—Part 7:Procedures for assessment of declared quality levels for percent nonconforming GB/T 6737-1997 Rubber,raw—Determination of volatile-matter Content GB/T 9869-1997 Rubber—Measurement of vulcanization characteristics with the oscillating disc curemeter GB/T 9869-2014 Rubber—Measurement of vulcanization characteristics with the oscillating disc curemeter GB/T 6378.3-2024 Sampling procedures for inspection by variables—Part 3:Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection GB/T 1232.2-2025 Rubber, unvulcanized—Determinations using a shearing-disc viscometer—Part 2:Determinations of pre-vulcanization characteristics GB/T 9869.1-2025 Rubber—Measurement of vulcanization characteristics using curemeters—Part 1:Introduction GB/T 9869.2-2025 Rubber—Measurement of vulcanization characteristics using curemeters—Part 2:Oscillating disc curemeter GB/T 9869.3-2025 Rubber—Measurement of vulcanization characteristics usingcuremeters—Part 3:Rotorless curemeter GB/T 6378.5-2025 Sampling procedures for inspection by variables—Part 5:Sequential sampling plans indexed by acceptance quality limit(AQL) for inspection by variables(known standard deviation)

ISO 1795:1992