GB/T 4127.2-2007 Active National standards

GB/T 4127.2-2007 Bonded abrasive products—Dimensions—Part 2:Grinding wheels for centreless external cylindrical grinding

GB/T 4127.2-2007 Bonded abrasive products—Dimensions—Part 2:Grinding wheels for centreless external cylindrical grinding

Publish Date: 2007-06-25 Implement Date: 2007-11-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 4127.2-2007

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Abrasives and abrasive tools

ICS Name: Abrasives and grinding tools

Publish Date: 2007-06-25

Implement Date: 2007-11-01

Pages: 6 pages

Scope

This part of GB/T 4127 specifies the dimensions, markings, and requirements of the following types of grinding wheels, expressed in millimeters: — Type 1: Flat grinding wheels; — Type 5: Single-sided concave grinding wheels; — Type 7: Double-sided concave grinding wheels. The bonded abrasives specified in this part are suitable for grinding the outer circumference of rotating workpieces. The workpieces are placed on a support plate between the guide wheel and the grinding wheel, and are guided to the grinding wheel by mechanical transmission of the guide wheel.

Development Information

Word Count: 9 Thousand words Pages: 6 pages

Same series standard

GB/T 4127.1-2007 Bonded abrasive products—Dimensions—Part 1:Grinding wheels for external cylindrical grinding between centres GB/T 4127.3-2007 Bonded abrasive products—Dimensions—Part 3:Grinding wheels for internal cylindrical grinding GB/T 4127.8-2007 Bonded abrasive products—Dimensions—Part 8:Grinding wheels for deburring and fettling/snagging GB/T 4127.9-2007 Bonded abrasive products—Dimensions—Part 9:Grinding wheels for high-pressure grinding GB/T 4127.15-2007 Bonded abrasive products—Dimensions—Part 15:Grinding wheels for cutting-off on stationary or mobile cutting-off machines GB/T 4127.16-2007 Bonded abrasive products—Dimensions—Part 16:Grinding wheels for cutting-off on hand held power tools

Replace the following standards

GB/T 4127-1997 Shapes and dimensions for bonded abrasive products

Referenced Standards

GB/T 2484-1994 Symbols and designation for bonded abrasive products GB/T 2484-2006 Bonded abrasive products—General requirements GB/T 2484-2018 Bonded abrasive products—General requirements GB/T 2484-2023 Bonded abrasive products—Shape types,designation and marking GB/T 2485-1997 Bonded abrasive products Grinding wheel Technical specifications GB/T 2485-2008 Bonded abrasive products—Technical specifications GB/T 2485-2016 Bonded abrasive products—Technical specifications

Adopt standards

ISO 603-2:1999

Related Standards

GB/T 13826-1992 Replaced

GB/T 13826-1992 Wet type (non-metallic)friction materials

Publish Date: 1992-11-05

GB/T 14319-1993 Replaced

GB/T 14319-1993 Superfinishing stone

Publish Date: 1993-04-17

GB/T 14320-1993 Replaced

GB/T 14320-1993 Vitrified force-honing stone

Publish Date: 1993-04-17

GB/T 14321-1993 Replaced

GB/T 14321-1993 Testing method for quantities of α-Al2O3 phase in alumina with an X-ray diffractometer

Publish Date: 1993-04-17

GB/T 14322-1993 Abolished

GB/T 14322-1993 Determination for grain size distribution of microgrits W3.5 to W0.5 of conventional abrasive

Publish Date: 1993-04-17

GB/T 15305.2-1994 Replaced

GB/T 15305.2-1994 Coated abrasives—Abrasive rolls—Dimensions and tolerances

Publish Date: 1994-12-20