GB/T 2484-2006 Replaced National standards

GB/T 2484-2006 Bonded abrasive products—General requirements

GB/T 2484-2006 Bonded abrasive products—General requirements

Publish Date: 2006-07-20 Implement Date: 2007-01-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 2484-2006

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Abrasives and abrasive tools

ICS Name: Abrasives and grinding tools

Publish Date: 2006-07-20

Implement Date: 2007-01-01

Pages: 19 pages

Scope

This standard specifies the following content: — Marking; — The main shapes and names of bonded abrasives; — The standard circumferential profile of flat grinding wheels; — The range of outer diameters; — The range of thicknesses; — The range of hole diameters; — Characteristics; — Markings. This standard applies to ordinary bonded abrasives (grinding wheels, grinding heads, sandstones, and grinding stones), but does not apply to products made from diamond or cubic boron nitride abrasives.

Development Information

Word Count: 35 Thousand words Pages: 19 pages

Replace the following standards

GB/T 2484-1994 Symbols and designation for bonded abrasive products

Superseded by the following standards

GB/T 2484-2018 Bonded abrasive products—General requirements

Referenced Standards

GB/T 2476-1994 Symbols of abrasive materials GB/T 2481.1-1998 Bonded abrasives—Determination and designation of grain size distribution—Part 1:Macrogrits F4 to F220 GB/T 2481.2-1998 Bonded abrasives—Determination and designation of grain size distribution—Part 2:Microgrits F230 to F1200 GB/T 2481.2-2009 Bonded abrasives—Determination and designation of grain size distribution—Part 2:Microgrits GB/T 2481.2-2020 Bonded abrasives—Determination and designation of grain size distribution—Part 2:Microgrits GB/T 2485-1997 Bonded abrasive products Grinding wheel Technical specifications GB/T 2485-2008 Bonded abrasive products—Technical specifications GB/T 2485-2016 Bonded abrasive products—Technical specifications GB/T 2486-1997 Bonded abrasive products Mounted wheel Technical specifications GB/T 2487-2001 Bonded abrasive products—Sticks—Technical specifications GB/T 2488-2001 Bonded abrasive products—Grinding segments—Technical specifications GB/T 2492-2003 Bonded abrasive products—Permissible unbalances of grinding wheels as delivered—Testing GB/T 2492-2017 Bonded abrasive products—Permissible unbalances of grinding wheels as delivered—Testing GB/T 4127-1997 Shapes and dimensions for bonded abrasive products GB/T 4127.1-2007 Bonded abrasive products—Dimensions—Part 1:Grinding wheels for external cylindrical grinding between centres GB/T 4127.2-2007 Bonded abrasive products—Dimensions—Part 2:Grinding wheels for centreless external cylindrical grinding GB/T 4127.3-2007 Bonded abrasive products—Dimensions—Part 3:Grinding wheels for internal cylindrical grinding GB/T 4127.4-2008 Bonded abrasive products—Dimensions—Part 4:Grinding wheels for surface grinding/peripheral grinding GB/T 4127.5-2008 Bonded abrasive products—Dimensions—Part5:Grinding wheels for surface grinding/face grinding GB/T 4127.6-2008 Bonded abrasive products—Dimensions—Part 6:Grinding wheels for tool and tool room grinding GB/T 4127.7-2008 Bonded abrasive products—Dimensions—Part 7:Grinding wheels for manually guided grinding GB/T 4127.8-2007 Bonded abrasive products—Dimensions—Part 8:Grinding wheels for deburring and fettling/snagging GB/T 4127.9-2007 Bonded abrasive products—Dimensions—Part 9:Grinding wheels for high-pressure grinding GB/T 4127.10-2008 Bonded abrasive products—Dimensions—Part 10:Stones for honing and superfinishings GB/T 4127.11-2008 Bonded abrasive products—Dimensions—Part 11:Hand finishing sticks GB/T 4127.12-2008 Bonded abrasive products—Dimensions—Part 12:Grinding wheels for deburring and fettling on a straight grinder GB/T 4127.13-2008 Bonded abrasive products—Dimensions—Part 13: Grinding wheels for deburring and fettling on a vertical grinder GB/T 4127.14-2008 Bonded abrasive products—Dimensions—Part 14:Grinding wheels for deburring and fettling/snagging on an angle grinder GB/T 4127.15-2007 Bonded abrasive products—Dimensions—Part 15:Grinding wheels for cutting-off on stationary or mobile cutting-off machines GB/T 4127.16-2007 Bonded abrasive products—Dimensions—Part 16:Grinding wheels for cutting-off on hand held power tools GB/T 4127.17-2017 Bonded abrasive products—Dimensions—Part 17:Spindle mounted wheels GB/T 4127.18-2017 Bonded abrasive products—Dimensions—Part 18:Grinding wheels for flat glass edge grinding machines GB/T 4127.14-2025 Bonded abrasive products—Dimensions—Part 14:Grinding wheels for deburring and fettling/snagging on an angle grinder GB/T 2481.1-2025 Bonded abrasives—Determination and designation of grain size distribution—Part 1:Macrogrits F4 to F220 GB/T 4127.15-2025 Bonded abrasive products—Dimensions—Part 15:Cutting-off wheels on stationary or mobile cuting-off machines GB/T 4127.16-2025 Bonded abrasive products—Dimensions—Part 16:Cuting-off wheels on hand held power tools GB/T 4127.8-2026 Bonded abrasive products—Dimensions—Part 8:Grinding wheels for deburring and fettling/snagging on stationary machine GB/T 4127.9-2026 Bonded abrasive products—Dimensions—Part 9:Grinding wheels for high-pressure grinding

Adopt standards

ISO 525:1999

Related Standards

GB/T 13826-1992 Replaced

GB/T 13826-1992 Wet type (non-metallic)friction materials

Publish Date: 1992-11-05

GB/T 14319-1993 Replaced

GB/T 14319-1993 Superfinishing stone

Publish Date: 1993-04-17

GB/T 14320-1993 Replaced

GB/T 14320-1993 Vitrified force-honing stone

Publish Date: 1993-04-17

GB/T 14321-1993 Replaced

GB/T 14321-1993 Testing method for quantities of α-Al2O3 phase in alumina with an X-ray diffractometer

Publish Date: 1993-04-17

GB/T 14322-1993 Abolished

GB/T 14322-1993 Determination for grain size distribution of microgrits W3.5 to W0.5 of conventional abrasive

Publish Date: 1993-04-17

GB/T 15305.2-1994 Replaced

GB/T 15305.2-1994 Coated abrasives—Abrasive rolls—Dimensions and tolerances

Publish Date: 1994-12-20