JG/T 232-2008 Active Industry standards-The construction industry

JG/T 232-2008 Bath room radiator

JG/T 232-2008 Bath room radiator

Publish Date: 2008-02-29 Implement Date: 2008-08-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: JG/T 232-2008

Standard Type: Industry standards

Standard Status: Active

is_force_gb: no

CCS Name: -

ICS Name: -

Publish Date: 2008-02-29

Implement Date: 2008-08-01

Pages: 8 pages

Scope

This standard specifies the terms and definitions, classification and marking, requirements, test methods, inspection rules, marking and reservation, packaging, transportation, storage, warranty and replacement of bathroom-type radiators.
This standard applies to bathroom-type radiators (hereinafter referred to as radiators) in civil buildings that use hot water as the heat medium, with an operating heat medium temperature not exceeding 95℃, a pH of 7.0 to 12.0, a chloride and sulfate content not exceeding 100 mg/L each, and a dissolved oxygen content not exceeding 0.1 mg/L. Other water quality indicators shall comply with the requirements for heating water quality specified in GB 1576 and HG/T 3729 standards, according to the water supply situation of the heating system.

Development Information

Word Count: 12 Thousand words Pages: 8 pages

Referenced Standards

QJ 173 GB/T 985-1988 Basic forms and sizes of weld grooves for gas welding manual arc welding and gas-Shielded arc welding GB/T 985.1-2008 Recommended joint preparation for gas welding,manual metal arc welding,gas-shield arc welding and beam welding GB/T 985.2-2008 Recommended joint preparation for submerged arc welding GB/T 985.3-2008 Recommended joint preparation for gas-shield arc welding on aluminium and its alloys GB/T 985.4-2008 Recommended joint preparation for welding on clad steels GB 1576-2001 Water quality for industrial boilers GB/T 1576-2008 Water quality for industrial boilers GB/T 1576-2018 Water quality for industrial boilers GB/T 1720-2020 Circle-drawing test of coating films GB/T 1732-1993 Determination of impact resistance of film GB/T 1732-2020 Determination of impact resistance of coating films GB/T 1733-1993 Determination of resistance to water of films GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 3091-2001 Welded steel pipe for low pressure liquid delivery GB/T 3091-2008 Welded steel pipes for low pressure liquid delivery GB/T 3091-2015 Welded steel pipes for low pressure liquid delivery GB/T 3280-1992 Cold rolled stainless steel sheets and plates GB/T 3280-2007 Cold rolled stainless steel plate, sheet and strip GB/T 3280-2015 Cold rolled stainless steel plate, sheet and strip GB/T 7307-2001 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads GB/T 8163-1999 Seamless steel tubes for liquid service GB/T 8163-2008 Seamless steel tubes for liquid service GB/T 8163-2018 Seamless steel pipes for liquid service GB/T 12771-2000 Welded stainless steel pipes for liquid delivery GB/T 12771-2008 Welded stainless steel pipes for liquid delivery GB/T 12771-2019 Welded stainless steel pipes for fluid transport GB/T 13237-1991 Cold-rolled quality carbon structural steel sheets and strips GB/T 13237-2013 Cold rolled quality carbon structural steel sheets and strips GB/T 13754-1992 Test method of thermal output of heat emittor GB/T 13754-2008 Test methods of thermal output of heating radiators GB/T 13754-2017 Test methods of thermal output of heating radiators GB/T 14976-2002 Stainless steel seamless tubes for fluid transport GB/T 14976-2012 Seamless stainless steel pipes for fluid transport GB/T 17791-1999 Specification for seamless copper tube for air conditioning and refrigeration field service GB/T 17791-2007 Seamless copper tube for air conditioner and refrigeration equipment GB/T 17791-2017 Seamless copper and copper alloys tube forair conditioner and refrigeration equipment HG/T 3729-2004 Radio frequency-based physical field water treatment equipment technical specifications HGJ 223-1992 Technical specification for welding copper and copper alloys GB/T 3091-2025 Welded steel pipes for low pressure fluid delivery GB/T 14976-2025 Seamless stainless steel pipes for fluid transport

Related Standards

DZ/T 0101.12-1994 Active

DZ/T 0101.12-1994 Geological instrument manufacturing time quota for printed circuit board

Publish Date: 1994-01-27

JJG 204-1980 Active

JJG 204-1980 Meteorological Ventilation Psychrometer

Publish Date: 1980-07-11

SC 53-1980 Active

SC 53-1980 Transfer blade hydraulic steering gear repair quality standard

Publish Date: 1981-07-01

DZ 4-1981 Replaced

DZ 4-1981

Publish Date: 1981-08-20

SC 69-1982 Active

SC 69-1982 ZSS-12 Flash-type seawater desalination production device technical specifications

Publish Date: 1982-01-20

SC 72-1982 Active

SC 72-1982 Steel Fishing Boat Builder Quality Standards and Mooring Equipment Installation Technical Requirements

Publish Date: 1982-03-30