GB 6738-1986
Abolished
GB/T 44993-2024
Active
National standards
GB/T 44993-2024 On-site testing instruments of off-board charger for electric vehicles
GB/T 44993-2024 On-site testing instruments of off-board charger for electric vehicles
Price:
$ 66
Basic Information
Standard Code:
GB/T 44993-2024
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Electrical parameter inspection and power supply devices
ICS Name:
The measurement of electrical and magnetic quantities
Publish Date:
2024-12-31
Implement Date:
2025-07-01
Pages:
20 pages
Scope
This document specifies the terms and definitions, technical requirements, test methods, inspection rules, and packaging, transportation, and storage requirements for on-site testing instruments for non-vehicle-mounted chargers of electric vehicles. This document is applicable to the design, manufacture, procurement, and acceptance of on-site testing instruments for non-vehicle-mounted chargers with a voltage of 1,000 V or less.
Development Information
Referenced Standards
GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle)
GB/T 2423.5-2019 Environmental testing—Part 2:Test methods—Test Ea and guidance:Shock
GB/T 2423.43-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Mounting of specimens for vibration, impact and similar dynamic tests
GB/T 2423.56-2023 Environmental testing—Part 2:Test methods—Test Fh:Vibration,broadband random and guidance
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB 4824-2019 Industrial,scientific and medical equipment—Radio-frequency disturbance characteristics—Limits and methods of measurement
GB/T 5169.11-2017 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products(GWEPT)
GB/T 13384-2008 General specifications for packing of mechanical and electrical product
GB/T 18268.1-2010 Electrical equipment for measurement,control and laboratory use—EMC requirements—Part 1:General requirements
GB/T 18487.1-2023 Electric vehicle conductive charging system—Part 1:General requirements
GB/T 20234.3-2023 Connection set for conductive charging of electric vehicles—Part 3:DC charging coupler
GB/T 29317-2021 Terminology of electric vehicle charging/battery swap infrastructure
NB/T 33001-2018 NB/T 33001-2018 Non-vehicle Conveying Charging Machine for Electric Vehicles (Technical Conditions)
Related Standards
GB/T 9393-1988
Replaced
GB/T 9393-1988 STZ3 type connector for electronic measurement instrument
GB/T 12114-1989
Replaced
GB/T 12114-1989 Generic specification of high frequency signal generators
GB/T 12115-1989
Replaced
GB/T 12115-1989 Measuring methods for high frequency signal generators
GB/T 12116-1989
Replaced
GB/T 12116-1989 Generic specification for electronic analog voltmeters
GB/T 12117-1989
Replaced