GB 3198-1996
Abolished
YS/T 95.2-2009
Replaced
Industry standards-Non-ferrous metals
YS/T 95.2-2009 Aluminium foil for air conditioner—Part 2:Precoated aluminium foil
YS/T 95.2-2009 Aluminium foil for air conditioner—Part 2:Precoated aluminium foil
Basic Information
Standard Code:
YS/T 95.2-2009
Standard Type:
Industry standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Light metals and their alloys
ICS Name:
Aluminum products
Publish Date:
2009-12-04
Implement Date:
2010-06-01
Pages:
9 pages
Scope
This part of YS/T 95 specifies the requirements for coated aluminum foil used in air conditioner heat exchangers, the test methods, inspection rules, and marking, packaging, transportation, and storage, etc.
This part is applicable to aluminum foil used in air conditioner heat exchangers that are coated with a corrosion-resistant layer and a hydrophilic coating (hereinafter referred to as coated foil).
Development Information
Same series standard
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 1740-2007 Determination of resistance to heat and humidity of paint films
GB/T 1771-1991 Paints and varnishes—Determination of resistance to neutral salt spray
GB/T 1771-2007 Paints and varnishes—Determination of resistance to neutral salt spray(fog)
GB/T 3199-1996 Wrought aluminium and aluminium alloy products—Packing, marking, transporting and storing
GB/T 3199-2007 Wrought aluminium and aluminium alloy products—Packing, marking, transporting and storing
GB/T 6461-2002 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates—Rating of test specimens and manufactured articles subjected to corrosion tests
GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
GB/T 9286-1998 Paints and varnishes—Cross cut test for films
GB/T 9286-2021 Paints and varnishes—Cross-cut test
GB/T 9753-1988 Paints and varnishes—Cupping test
GB/T 9753-2007 Paints and varnishes—Cupping test
GB/T 22638.9-2008 Test methods for aluminium and aluminium alloy foils Part 9:Determination of hydrophilic property
GB/T 22638.9-2016 Test methods for aluminium and aluminium alloy foils—Part 9:Determination of hydrophilic property
GB/T 22638.10-2008 Test methods for aluminium and aluminium alloy foils—Part 10:Determination of mass per unit area(surface density)of coatings
GB/T 22638.10-2016 Test methods for aluminium and aluminium alloy foils—Part 10:Determination of mass per unit area(surface density) of coatings
YS/T 95.1-2001 Aluminium foil for air conditioner—Part 1:Untreated aluminium foil
YS/T 95.1-2009 Aluminium foil for air conditioner—Part 1:Mill finish foil
YS/T 95.1-2015 Aluminium foil for air conditioner radiator—Part 1:Finstock
YS/T 95.1-2025 Air conditioner heat exchanger with aluminum and aluminum alloy strips and foils Part 1: Base material
Related Standards
GB/T 16474-1996
Replaced
GB/T 16474-1996 Wrought aluminium and aluminium alloy—Designation system
GB/T 16475-1996
Replaced
GB/T 16475-1996 Temper designation system for wrought aluminium and aluminium alloy
GB/T 3190-1996
Replaced
GB/T 3190-1996 Wrought aluminium and aluminium alloys—Chemical composition limits
GB/T 16501-1996
Abolished
GB/T 16501-1996 Hot rolled strip of aluminium and aluminium alloy
GB/T 3196-2001
Replaced