YY/T 0988.2-2016 Active Industry standards-Medicine

YY/T 0988.2-2016 Coatings of surgical implants—Part 2:Titanium and titanium-6 aluminum-4 vanadium alloy powders

YY/T 0988.2-2016 Coatings of surgical implants—Part 2:Titanium and titanium-6 aluminum-4 vanadium alloy powders

Publish Date: 2016-03-23 Implement Date: 2017-01-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: YY/T 0988.2-2016

Standard Type: Industry standards

Standard Status: Active

is_force_gb: no

CCS Name: Orthopaedic surgery, orthopaedic instruments

ICS Name: Surgical implants, prostheses, and orthoses

Publish Date: 2016-03-23

Implement Date: 2017-01-01

Pages: 8 pages

Scope

This part of YY/T 0988 specifies the requirements for pure titanium powder and titanium-6 aluminum-4 vanadium alloy powder used to form coatings on titanium alloy implants.
The powders specified in this part can be used to form coatings through sintering or thermal spraying processes.
This part specifies the requirements for the powders, but it does not apply to the performance of coatings made from the powders.
Note: Fine titanium powders may cause spontaneous combustion, and handling should comply with relevant guidelines.

Development Information

Word Count: 12 Thousand words Pages: 8 pages

Same series standard

YY/T 0988.1-2016 Coatings of surgical implants—Part 1:Cobalt-28 chromium-6 molybdenum powder YY/T 0988.11-2016 Coatings of surgical implants—Part 11:Tension testing method of calcium phosphate coating and metallic coatings YY/T 0988.12-2016 Coatings of surgical implants—Part 12:Shear testing method of calcium phosphate coating and metallic coatings YY/T 0988.13-2016 Coatings of surgical implants—Part 13:Test method for shear and bending fatigue testing of calcium phosphate and metallic and calcium phosphate/metallic coating YY/T 0988.14-2016 Coatings of surgical implants—Part 14:Stereological evaluation method of porous coatings YY/T 0988.15-2016 Coatings of surgical implants—Part 15:Test methord for abrasion resistance testing of metallic thermal spray coatings

Referenced Standards

ASTM B 214 ASTM B 215 ASTM B 299 ASTM E 11 ASTM E 2371 ASTM F 67 ASTM F 1472 AMS 2249 AMS 4998

Related Standards

GB 12264-1990 Replaced

GB 12264-1990 Artificial heart-lung machine Silicon rubber pump tube

Publish Date: 1990-01-08

GB 12279-1990 Replaced

GB 12279-1990 Cardiac valve prostheses general technical specification

Publish Date: 1990-03-26

GB 12417-1990 Replaced

GB 12417-1990 The general technological conditions of surgical metal implant

Publish Date: 1990-07-17

GB/T 13461-1992 Replaced

GB/T 13461-1992 Synthetic resin blow knee prostheses

Publish Date: 1992-06-01

GB/T 14191-1993 Replaced

GB/T 14191-1993 Terminology for prosthetics and orthotics

Publish Date: 1993-02-25

GB 14722-1993 Replaced

GB 14722-1993 Endoskeletal above knee prosthesis

Publish Date: 1993-12-04