YY/T 0988.12-2016 Active Industry standards-Medicine

YY/T 0988.12-2016 Coatings of surgical implants—Part 12:Shear testing method of calcium phosphate coating and metallic coatings

YY/T 0988.12-2016 Coatings of surgical implants—Part 12:Shear testing method of calcium phosphate coating and metallic coatings

Publish Date: 2016-03-23 Implement Date: 2017-01-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: YY/T 0988.12-2016

Standard Type: Industry standards

Standard Status: Active

is_force_gb: no

CCS Name: Orthopaedic surgery, orthopaedic instruments

ICS Name: Surgical implants, prostheses, and orthoses

Publish Date: 2016-03-23

Implement Date: 2017-01-01

Pages: 12 pages

Scope

This part of YY/T 0988 specifies the shear test method for continuous calcium phosphate coatings and metal coatings bonded to dense metal substrates at room temperature. This part is used to evaluate the bonding strength or internal cohesion of the coatings to the substrates under shear conditions (parallel to the bonding plane).
This part adopts the International System of Units (SI).
This part does not attempt to address all safety issues involved, even those related to its use. It is the responsibility of the users of this part to establish appropriate safety and health regulations and to clarify the applicability of management restrictions before use.

Development Information

Word Count: 20 Thousand words Pages: 12 pages

Same series standard

YY/T 0988.1-2016 Coatings of surgical implants—Part 1:Cobalt-28 chromium-6 molybdenum powder YY/T 0988.2-2016 Coatings of surgical implants—Part 2:Titanium and titanium-6 aluminum-4 vanadium alloy powders YY/T 0988.11-2016 Coatings of surgical implants—Part 11:Tension testing method of calcium phosphate coating and metallic coatings YY/T 0988.13-2016 Coatings of surgical implants—Part 13:Test method for shear and bending fatigue testing of calcium phosphate and metallic and calcium phosphate/metallic coating YY/T 0988.14-2016 Coatings of surgical implants—Part 14:Stereological evaluation method of porous coatings YY/T 0988.15-2016 Coatings of surgical implants—Part 15:Test methord for abrasion resistance testing of metallic thermal spray coatings

Referenced Standards

GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 10623-1989 Metallic materials—Terms of mechanical test GB/T 10623-2008 Metallic material—Mechanical testing—Vocabulary GB/T 16825.1-2002 Verification of static uniaxial testing machines—Part 1:Tension/compression testing machines—Verification and calibration of the force-measuring system GB/T 16825.1-2008 Verification of static uniaxial testing machines—Part 1:Tension/compression testing machines—Verification and calibration of the force-measuring system GB/T 16825.1-2022 Metallic materials—Calibration and verification of static uniaxial testing machines—Part 1:Tension/compression testing machines—Calibration and verification of the force-measuring system

Related Standards

GB 12264-1990 Replaced

GB 12264-1990 Artificial heart-lung machine Silicon rubber pump tube

Publish Date: 1990-01-08

GB 12279-1990 Replaced

GB 12279-1990 Cardiac valve prostheses general technical specification

Publish Date: 1990-03-26

GB 12417-1990 Replaced

GB 12417-1990 The general technological conditions of surgical metal implant

Publish Date: 1990-07-17

GB/T 13461-1992 Replaced

GB/T 13461-1992 Synthetic resin blow knee prostheses

Publish Date: 1992-06-01

GB/T 14191-1993 Replaced

GB/T 14191-1993 Terminology for prosthetics and orthotics

Publish Date: 1993-02-25

GB 14722-1993 Replaced

GB 14722-1993 Endoskeletal above knee prosthesis

Publish Date: 1993-12-04