GB/T 3420-1982
Replaced
GB/T 36701-2018
Active
National standards
GB/T 36701-2018 Guideline for defect repair of buried steel pipelines
GB/T 36701-2018 Guideline for defect repair of buried steel pipelines
Basic Information
Standard Code:
GB/T 36701-2018
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Oil and gas gathering and transportation equipment
ICS Name:
Iron pipes and steel pipes
Publish Date:
2018-09-17
Implement Date:
2019-03-01
Pages:
29 pages
Scope
This standard specifies the methods and implementation procedures for repairing defects in the pipe bodies of buried steel pipelines.
This standard is applicable to the repair of defects in the pipe bodies of buried long-distance steel pipelines and gathering pipelines of steel grades L485/X70 and below. Other buried steel pipelines of steel grades L485/X70 and below can refer to this standard for implementation.
Development Information
Referenced Standards
GB/T 8923.1-2011 Preparation of steel substrates before application of paints and related products—Visual assessment of surface cleanliness—Part 1:Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
GB/T 31032-2014 Welding and acceptance standard for steel pipings and pipelines
GB/T 23257-2009 Polyethylene coating for buried steel pipeline
GB/T 23257-2017 Polyethylene coating for buried steel pipeline
GB/T 28055-2011 Technical standard for hot tapping and plugging on steel pipeline
GB/T 28055-2023 Technical specification for hot tapping and plugging on steel pipeline
GB/T 30582-2014 Risk-Based-Inspection and assessment methodology of external damage for buried steel pipelines
NB/T 47013.2-2015 Non-destructive testing of pressure equipment - Part 2: Radiographic testing
NB/T 47013.3-2023 Non-destructive testing of pressure equipment - Part 3: Ultrasonic testing
NB/T 47013.3-2015 Non-destructive testing of pressure equipment - Part 3: Ultrasonic testing
NB/T 47013.4-2015 "Non-destructive testing of pressure equipment - Part 4: Magnetic particle testing"
NB/T 47013.5-2015 Non-destructive testing of pressure equipment - Part 5: Penetrant testing
SY/T 4109-2020 Petroleum and natural gas steel pipeline non-destructive testing
SY/T 4109-2013 Non-destructive testing of oil and gas pipelines made of steel
SY/T 5918-2017 Specification for Repairing Coating and Insulation of External Steel Pipe Pipeline Buried in the Ground
SY/T 5918-2011 Technical specification for the repair of external protective coating for buried steel pipes
SY/T 6444-2018 SY/T 6444-2018 Petroleum engineering construction safety specification
SY/T 6444-2010 SY/T 6444-2010 Safety regulations for construction and construction safety of petroleum engineering facilities
SY/T 4109-2005 Petroleum and natural gas steel pipeline non-destructive testing
SY/T 5918-2004 The Specification for Repairing External Anti-corrosion Coating of Underground Steel Pipe (SY/T 5918-2004)
SY 6444-2000 Oil engineering construction safety regulations
GB 50251-2015 Code for design of gas transmission pipeline engineering
GB 50253-2014 Code for design of oil transportation pipeline engineering
GB 50369-2014 Code for construction and acceptance of oil and gas long-distance transmission pipeline engineering
SY/T 5918-2024 Techniques and specifications for repairing the external protective layer and insulation layer of buried steel pipes
Related Standards
GB/T 3421-1982
Abolished
GB/T 3421-1982 Cast-iron pressure pipe centrifugally cast in sand-lined molds
GB/T 3422-1982
Replaced
GB/T 3422-1982 Cast-iron pressure pipe made by continuous casting process
GB/T 6483-1986
Replaced
GB/T 6483-1986 Soft mechanical joint grey cast iron pipe
GB/T 8714-1988
Replaced
GB/T 8714-1988 Grey cast iron pipes with rubber ring of ladder-lip-shaped
GB/T 8715-1988
Replaced