CJ/T 329-2010 Active Industry standards-Urban construction

CJ/T 329-2010 Spirally wound steelreinforced polyethylene pipes with double plain wall for underground sewer

Publish Date: 2010-03-15 Implement Date: 2010-08-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: CJ/T 329-2010

Standard Type: Industry standards

Standard Status: Active

is_force_gb: no

CCS Name: -

ICS Name: -

Publish Date: 2010-03-15

Implement Date: 2010-08-01

Pages: 28 pages

Scope

This standard specifies the terms and definitions, symbols, codes, raw materials, product structures, classifications, and connection methods, requirements, test methods, inspection rules, marking, transportation, and storage of buried polyethylene double-walled steel-plastic composite wrapped drainage pipes.
This standard is applicable to pipes used in long-term conveying of media with a temperature below 45°C for unpressurized buried urban rainwater and sewage drainage, industrial wastewater drainage, and agricultural irrigation and drainage projects.

Development Information

Word Count: 38 Thousand words Pages: 28 pages

Referenced Standards

GB/T 14152-2001 Thermoplastics pipes—Determination of resistance to external blows—Round-the-clock method GB/T 228-2002 Metallic materials—Tensile testing at ambient temperature GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.2-2015 Metallic materials—Tensile testing—Part 2:Method of test at elevated temperature GB/T 228.3-2019 Metallic materials—Tensile testing—Part 3:Method of test at low temperature GB/T 228.4-2019 Metallic materials—Tensile testing—Part 4:Method of test in liquid helium GB/T 1033-1986 Test method for density and relative density of plastics GB/T 1033.1-2008 Plastics—Methods for determining the density of non-cellular plastics—Part 1:Immersion method,liquid pyknometer method and titration method GB/T 1033.2-2010 Plastics—Methods for determining the density of non-cellular plastics—Part 2:Density gradient column method GB/T 1033.3-2010 Plastics—Methods for determining the density of non-cellular plastics—Part 3:Gas pyknometer method GB/T 2518-1988 Continual hot-dip zinc-coated steel sheets and strips GB/T 2518-2004 Continuous hot-dip zinc-coated steel sheets and strips GB/T 2518-2008 Continuously hot-dip zinc-coated steel sheet and strip GB/T 2518-2019 Continuously hot-dip zinc and zinc alloy coated steel sheet and strip GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2918-1998 Plastics—Standard atmospheres for conditioning and testing GB/T 2918-2018 Plastics—Standard atmospheres for conditioning and testing GB/T 3280-1992 Cold rolled stainless steel sheets and plates GB/T 3280-2007 Cold rolled stainless steel plate, sheet and strip GB/T 3280-2015 Cold rolled stainless steel plate, sheet and strip GB/T 3682-2000 Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate(MFR)and melt volume-flow rate(MVR)of thermoplastics—Part 1:Standard method GB/T 3682.2-2018 Plastics—Determination of the melt mass-flow rate(MFR)and melt volume-flow rate(MVR)of thermoplastics—Part 2:Method for materials sensitive to time-temperature history and/or moisture GB/T 6111-2003 Thermoplastics pipes for the conveyance of fluids-Resistance to internal pressure—Test method GB/T 6111-2018 Thermoplastics piping systems for the conveyance of fluids—Determination of the resistance to internal pressure GB/T 6671-2001 Thermoplastics pipes-Determination of longitudinal reversion GB/T 8804.3-2003 Thermoplastic pipes—Determination of tensile properties—Part 3:Polyolefin pipes GB/T 9647-2003 Thermoplastics pipes—Determination of ring stiffness GB/T 9647-2015 Thermoplastics pipes—Determination of ring stiffness GB/T 17391-1998 Test method for thermal stability of polyethylene pipes and fittings GB/T 18042-2000 Thermoplastics pipes—Determination of creep ratio

Related Standards

DZ/T 0101.12-1994 Active

DZ/T 0101.12-1994 Geological instrument manufacturing time quota for printed circuit board

Publish Date: 1994-01-27

JJG 204-1980 Active

JJG 204-1980 Meteorological Ventilation Psychrometer

Publish Date: 1980-07-11

SC 53-1980 Active

SC 53-1980 Transfer blade hydraulic steering gear repair quality standard

Publish Date: 1981-07-01

DZ 4-1981 Replaced

\nDZ 4-1981 Method for Compiling Product Models of Geological Instrumentation Equipment

Publish Date: 1981-08-20

SC 69-1982 Active

SC 69-1982 ZSS-12 Flash-type seawater desalination production device technical specifications

Publish Date: 1982-01-20

SC 72-1982 Active

SC 72-1982 Steel Fishing Boat Builder Quality Standards and Mooring Equipment Installation Technical Requirements

Publish Date: 1982-03-30