GB/T 6109.22-2008 Replaced National standards

GB/T 6109.22-2008 Enamelled round winding wire—Part 22:Aromatic polyimide enamelled round copper wire,class 240

GB/T 6109.22-2008 Enamelled round winding wire—Part 22:Aromatic polyimide enamelled round copper wire,class 240

Publish Date: 2008-04-21 Implement Date: 2008-12-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 6109.22-2008

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Wire with an insulating layer

ICS Name: Comprehensive overview of wires and cables

Publish Date: 2008-04-21

Implement Date: 2008-12-01

Pages: 8 pages

Scope

This part of GB/T 6109 specifies the requirements for single-layer lacquered copper wires based on aromatic polyimide resin for Class 240. Class 240 indicates the thermal class, which requires a minimum temperature index of 240 and a thermal shock temperature of at least 260°C. The Celsius temperature corresponding to the temperature index is not necessarily the recommended operating temperature for the lacquered wires, as this depends on many factors, including the type of equipment used. The nominal diameter range of the conductors specified in this part is: — Class 1: 0.020 mm and above, up to 2.000 mm; — Class 2: 0.020 mm and above, up to 5.000 mm. The nominal diameter of the conductors shall comply with the provisions of Chapter 4 of GB/T 6109.1—2008.

Development Information

Word Count: 10 Thousand words Pages: 8 pages

Same series standard

GB/T 6109.1-2008 Enamelled round winding wire—Part 1:General requirements GB/T 6109.2-2008 Enamelled round winding wire—Part 2:Polyester enamelled round copper wire,class 155 GB/T 6109.3-2008 Enamelled round winding wire—Part 3:Polyvinyl acetal enamelled round copper wire,class 120 GB/T 6109.4-2008 Enamelled round winding wire—Part 4:Solderable polyurethane enamelled round copper wire,class 130 GB/T 6109.5-2008 Enamelled round winding wire—Part 5:Polyesterimide enamelled round copper wire,class 180 GB/T 6109.6-2008 Enamelled round winding wire—Part 6:Polyimide enamelled round copper wire,class 220 GB/T 6109.7-2008 Enamelled round winding wire—Part 7:Polyester enamelled round copper wire,class 130L GB/T 6109.9-2008 Enamelled round winding wire—Part 9:Solderable polyurethane enamelled round copper wire overcoated with polyamide,class 130 GB/T 6109.10-2008 Enamelled round winding wire—Part 10:Solderable polyurethane enamelled round copper wire,class 155 GB/T 6109.11-2008 Enamelled round winding wire—Part 11:Solderable polyurethane enamelled round copper wire overcoated with polyamide,class 155 GB/T 6109.12-2008 Enamelled round winding wire—Part 12:Polyester or polyesterimide enamelled round copper wire overcoated with polyamide,class 180 GB/T 6109.13-2008 Enamelled round winding wire—Part 13:Solderable polyesterimide enamelled round copper wire,class 180 GB/T 6109.14-2008 Enamelled round winding wire—Part 14:Polyamide-imide enamelled round copper wire,class 200 GB/T 6109.15-2008 Enamelled round winding wire—Part 15:Solderable polyurethane enamelled round copper wire,class 130,with a bonding layer GB/T 6109.16-2008 Enamelled round winding wire—Part 16:Solderable polyurethane enamelled round copper wire,class 155,with a bonding layer GB/T 6109.17-2008 Enamelled round winding wire—Part 17:Solderable polyesterimide enamelled round copper wire,class 180,with a bonding layer GB/T 6109.18-2008 Enamelled round winding wire—Part 18:Polyesterimide enamelled round copper wire,class 180,with a bonding layer GB/T 6109.19-2008 Enamelled round winding wire—Part 19:Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire,class 200,with a bonding layer GB/T 6109.20-2008 Enamelled round winding wire—Part 20:Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire,class 200 GB/T 6109.21-2008 Enamelled round winding wire—Part 21:Polyester-amide-imide enamelled round copper wire,class 200 GB/T 6109.23-2008 Enamelled round winding wire—Part 23:Solderable polyurethane enamelled round copper wire,class 180

Superseded by the following standards

GB/T 6109.22-2025 Enamelled round winding wire—Part 22:Aromatic polyimide enamelled round copper wire,class 240

Referenced Standards

GB/T 6109.1-2008 Enamelled round winding wire—Part 1:General requirements

Adopt standards

IEC 60317-46:1997

Related Standards

GB/T 3956-1997 Replaced

GB/T 3956-1997 Conductors of insulated cables

Publish Date: 1997-10-28

GB/T 17650.1-1998 Replaced

GB/T 17650.1-1998 Test on gases evolved during combustion of materials from cables Part 1:Determination of the amount of halogen acid gas

Publish Date: 1998-12-21

GB/T 17650.2-1998 Replaced

GB/T 17650.2-1998 Test on gases evolved during combustion of materials from cables Part 2:Determination of degree of acidity of gases by measuring pH and conductivity

Publish Date: 1998-12-21

GB/T 17651.1-1998 Replaced

GB/T 17651.1-1998 Measurement of smoke density of cables burning under defined conditions Part 1:Test apparatus

Publish Date: 1998-12-21

GB/T 17651.2-1998 Replaced

GB/T 17651.2-1998 Measurement of smoke density of cables burning under defined conditions Part 2:Test procedure and requirements

Publish Date: 1998-12-21

GB/T 4074.1-1999 Replaced

GB/T 4074.1-1999 Test methods for winding wires—Part 1:General

Publish Date: 1999-11-11