GB/T 25684.6-2021 Active National standards

GB/T 25684.6-2021 Earth-moving machinery—Safety—Part 6:Requirements for dumpers

GB/T 25684.6-2021 Earth-moving machinery—Safety—Part 6:Requirements for dumpers

Publish Date: 2021-12-31 Implement Date: 2022-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 25684.6-2021

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Construction engineering construction machinery

ICS Name: Earthmoving machinery

Publish Date: 2021-12-31

Implement Date: 2022-07-01

Publisher: 国家市场监督管理总局、国家标准化管理委员会

Technical Committee: 全国土方机械标准化技术委员会(SAC/TC 334)

Pages: 12 pages

Scope

本文件规定了ISO 6165定义的轮胎式和履带式自卸车（包括坐姿操作式小型自卸车或站立操纵式小型自卸车）的安全要求，不适用于公路自卸车；规定了土方机械在制造商指定用途或预知的误操作条件下应用时，与其相关的所有重大危险、危险状态和危险事件（见GB/T 25684.1—2021的附录A）；并规定了在使用、操作和维护中消除或降低重大危险、危险状态或危险事件引起的风险的技术措施。
本文件与GB/T 25684.1（规定了两个或更多的土方机械族的通用安全要求）合并使用。本文件的特定要求优先于GB/T 25684.1的通用要求。
本文件不适用于在本文件实施前制造的机器。

Development Information

Drafting Units:

内蒙古北方重型汽车股份有限公司、中冶京诚(湘潭)矿山装备有限公司、临工集团济南重机有限公司、湘潭电机股份有限公司、广西柳工机械股份有限公司、天津工程机械研究院有限公司、本溪北方机械重汽有限责任公司、陕西同力重工股份有限公司、湘电重型装备有限公司、徐州徐工汽车制造有限公司

Drafting Persons:

李来平、肖富凯、支开印、朱广辉、唐绪文、吴红丽、吴云发、王宜、邱增华、张兆亮、裴洁、张钰

Word Count: 25 Thousand words Pages: 12 pages

Same series standard

GB/T 25684.1-2021 Earth-moving machinery—Safety—Part 1:General requirements GB/T 25684.2-2021 Earth-moving machinery—Safety—Part 2:Requirements for dozers GB/T 25684.3-2021 Earth-moving machinery—Safety—Part 3:Requirements for loaders GB/T 25684.4-2021 Earth-moving machinery—Safety—Part 4:Requirements for backhoe loaders GB/T 25684.5-2021 Earth-moving machinery—Safety—Part 5:Requirements for hydraulic excavators GB/T 25684.7-2021 Earth-moving machinery—Safety—Part 7:Requirements for scrapers GB/T 25684.8-2021 Earth-moving machinery—Safety—Part 8:Requirements for graders GB/T 25684.9-2021 Earth-moving machinery—Safety—Part 9: Requirements for pipelayers GB/T 25684.10-2021 Earth-moving machinery—Safety—Part 10:Requirements for trenchers GB/T 25684.11-2021 Earth-moving machinery—Safety—Part 11:Requirements for landfill compactors GB/T 25684.12-2021 Earth-moving machinery—Safety—Part 12:Requirements for cable excavators GB/T 25684.13-2021 Earth-moving machinery—Safety—Part 13:Requirements for rollers

Replace the following standards

GB 25684.6-2010 Earth-moving machinery—Safety—Part 6:Requirements for dumpers

Referenced Standards

GB/T 8419-2007 Earth-moving machinery—Laboratory evaluation of operator seat vibration GB/T 17771-2010 Earth-moving machinery—Falling-object protective structures—Laboratory tests and performance requirements GB/T 17772-2018 Earth-moving machinery—Laboratory evaluations of protective structures—Specifications for deflection-limiting volume GB/T 25684.1-2021 Earth-moving machinery—Safety—Part 1:General requirements ISO 3471 ISO 6165 ISO 7132 ISO 10268 ISO 13333 ISO 20474-1

Adopt standards

ISO 20474-6:2017

Related Standards

GB/T 6375-1986 Replaced

GB/T 6375-1986 Earth-moving machinery—Method of test for the measurement of draw-bar pull

Publish Date: 1986-05-13

GB/T 6572.2-1986 Replaced

GB/T 6572.2-1986 Excavators terminology—Cable operated type

Publish Date: 1986-07-22

GB/T 13331-1991 Replaced

GB/T 13331-1991 Hydraulic excavators—Methods of measuring lift capacity

Publish Date: 1991-12-16

GB/T 13332-1991 Replaced

GB/T 13332-1991 Hydraulic excavators—Methods of measuring tool forces

Publish Date: 1991-12-16

GB/T 14289-1993 Active

GB/T 14289-1993 Earth-moving machinery—Diagnostic ports

Publish Date: 1993-04-17

GB/T 14780-1993 Replaced

GB/T 14780-1993 Earth-moving machinery—Drain, fill and level plugs

Publish Date: 1993-12-27