GB/T 29.1-2013 Active National standards

GB/T 29.1-2013 Hexagon bolts with slot on head

GB/T 29.1-2013 Hexagon bolts with slot on head

Publish Date: 2013-06-09 Implement Date: 2014-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 29.1-2013

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Fasteners

ICS Name: Bolts, screws, and studs

Publish Date: 2013-06-09

Implement Date: 2014-03-01

Pages: 6 pages

Scope

This standard specifies hexagonal head bolts with grooves, with thread specifications ranging from M 3 to M 12, full thread, performance grades of 5.6, 8.8, 10.9, A2-70, A4-70, CU2, CU3, and AL4, and product grades of A.
The bolts specified in this standard have a Phillips slot machined into the head of the GB/T 5783 product.

Development Information

Word Count: 8 Thousand words Pages: 6 pages

Same series standard

GB/T 29.2-2013 Hexagon bolts with cross recess on head

Replace the following standards

GB/T 29.1-1988 Hexagon bolts with slot on head—Product grade A and B

Referenced Standards

GB/T 2-2001 Fasteners—Ends of parts with external thread GB/T 2-2016 Fasteners—Ends of parts with external thread GB/T 90.1-2002 Fasteners—Acceptance inspection GB/T 90.1-2023 Fasteners—Acceptance inspection GB/T 90.2-2002 Fasteners—Marking and packaging GB/T 196-2003 General purpose metric screw threads—Basic dimensions GB/T 197-2003 General purpose metric screw threads—Tolerances GB/T 197-2018 General purpose metric screw threads—Tolerances GB/T 1237-2000 Designation system for fasteners GB/T 3098.1-2000 Mechanical properties of fasteners—Bolts, screws and studs GB/T 3098.1-2010 Mechanical properties of fasteners—Bolts,screws and studs GB/T 3103.1-2002 Tolerances for fasteners—Bolts, screws, studs and nuts GB/T 5267.1-2002 Fasteners—Electroplated coatings GB/T 5267.1-2023 Fasteners—Electroplate coating GB/T 5267.2-2002 Fasteners—Non-electrolytically applied zinc flake coatings GB/T 5267.2-2017 Fasteners—Non-electrolytically applied zinc flake coatings GB/T 5267.2-2021 Fasteners—Non-electrolytically applied zinc flake coatings GB/T 5779.1-2000 Fasteners—Surface discontinuities—Bolts,screws and studs for general requirements GB/T 5783-2000 Hexagon head bolts—Full thread GB/T 5783-2016 Hexagon head bolts—Full thread GB/T 16938-1997 Fasteners—General requirements for blots,screws,studs and nuts GB/T 16938-2008 Fasteners—General requirements for bolts,screws,studs and nuts GB/T 196-2025 General purpose metric screw threads—Basic dimensions GB/T 5783-2025 Fasteners—Hexagon head bolts—Full thread

Related Standards

GB/T 3750.3-1983 Replaced

GB/T 3750.3-1983 Hollow screws

Publish Date: 1983-06-17

GB/T 5277-1985 Active

GB/T 5277-1985 Fasteners—Clearance holes for bolts and screws

Publish Date: 1985-08-01

GB/T 6560-1986 Replaced

GB/T 6560-1986 Cross recessed pan head thread forming screws

Publish Date: 1986-07-02

GB/T 6561-1986 Replaced

GB/T 6561-1986 Cross recessed countersunk head thread forming screws

Publish Date: 1986-07-02

GB/T 6562-1986 Replaced

GB/T 6562-1986 Cross recessed raised countersunk head thread forming screws

Publish Date: 1986-07-02

GB/T 6563-1986 Replaced

GB/T 6563-1986 Hexagon head thread forming screws

Publish Date: 1986-07-02