GB/T 15103-1994
Replaced
LY/T 2723-2016
Active
Industry standards-Forestry
LY/T 2723-2016 Forestry machinery—Electric branch chippers with drum
LY/T 2723-2016 Forestry machinery—Electric branch chippers with drum
Basic Information
Standard Code:
LY/T 2723-2016
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Wood harvesting and transportation machinery and equipment
ICS Name:
Forestry equipment
Publish Date:
2016-07-27
Implement Date:
2016-12-01
Pages:
13 pages
Scope
This standard specifies the terms, definitions, model numbering, series type spectrum, basic parameters, technical requirements, test methods, inspection rules, marking, user manuals, packaging, transportation, and storage of electric drum-type branch shredders for forestry machinery (hereinafter referred to as shredders).
This standard is only applicable to drum-type branch shredders powered by electric motors with a blade roller diameter of not less than 500 mm.
Development Information
Referenced Standards
GB/T 1184-1996 Geometrical tolerancing—Geometrical tolerance for features without individual tolerance indications
GB/T 3098.1-2010 Mechanical properties of fasteners—Bolts,screws and studs
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB 755-2000 Rotating electrical machines—Rating and performance
GB/T 755-2008 Rotating electrical machines—Rating and performance
GB/T 755-2019 Rotating electrical machines—Rating and performance
GB/T 755.2-2003 Methods for determining losses and efficiency of rotating electrical machinery from tests(excluding machines for traction vehicles)
GB/T 2828.4-2008 Sampling procedures for inspection by attributes—Part 4:Procedures for assessment of declared quality levels
GB 5013.4-1997 Rubber insulated cables of rated voltages up to and including 450/750V—Part 4:Cords and flexible cables
GB/T 5013.4-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 4:Cords and flexible cables
GB 5023.5-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V—Part 5:Flexible cables (cords)
GB/T 5023.5-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 5:Flexible cables (cords)
GB 5226.1-2002 Safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB 5226.1-2008 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB/T 5226.1-2019 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB/T 9239.1-2006 Mechanical vibration—Balance quality requirements for rotors in a constant(rigid)state—Part 1:Specification and verification of balance tolerances
GB/T 9480-2001 Tractors machinery for agriculture and forestry,powered lawn and garden equipment—Operator's manuals—Content and presentation
GB 10396-1999 Tractors,machinery for agriculture and forestry,powered lawn and garden equipment—Safety signs and hazard pictorials—General principles
GB 10396-2006 Tractors,machinery for agriculture and forestry,powered lawn and garden equipment—Safety signs and hazard pictorials—General principles
GB/T 13384-1992 General specifications for packagings of mechanical and electrical products
GB/T 13384-2008 General specifications for packing of mechanical and electrical product
JB/T 5673-2015 JBT 5673-2015 Agricultural and Forestry Tractors and Machinery Coating General Technical Specification
JB/T 5673-1991 A general technical specification for painting of agricultural and forestry tractors and implements
GB/T 755-2025 Rotating electrical machines—Rating and performance
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
Related Standards
GB/T 5390-1995
Replaced
GB/T 5390-1995 Portable chain saws—Measurement at the operator's position of air-borne noise
GB/T 5392-1995
Abolished
GB/T 5392-1995 Portable chain saws—Technical requirements
GB/T 5394-1995
Active
GB/T 5394-1995 Portable chain saws—Methods of production test in forest
GB/T 5395-1995
Replaced
GB/T 5395-1995 Portable chain saws—Measurement of hand-transmitted vibration
GB 17668-1999
Replaced