GB/T 755.2-2003
Abolished
GB/T 25090-2010
Active
National standards
GB/T 25090-2010 Step-down power saving device for asynchronous motor at light load
GB/T 25090-2010 Step-down power saving device for asynchronous motor at light load
Basic Information
Standard Code:
GB/T 25090-2010
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Rotating motor
ICS Name:
Other standards related to rotating motors
Publish Date:
2010-09-02
Implement Date:
2011-02-01
Pages:
10 pages
Scope
This standard specifies the classification, requirements, and test methods for low-load voltage regulation and energy-saving devices for electric motors (hereinafter referred to as energy-saving devices).
This standard applies to energy-saving devices with a rated voltage not exceeding 6kV, a rated frequency of 50/60Hz, and a rated capacity not exceeding 2500kW.
Development Information
Referenced Standards
GB/T 3797-2005 Electrical control assemblies
GB/T 3906-2006 Alternating-current metal-enclosed switchgear and controlgear for rated voltages above 3.6 kV and up to and including 40.5 kV
GB 7251.1-2005 Low-voltage switchgear and control gear assemblies—Part 1:Type-tested and partially type-tested assemblies
GB/T 11022-1999 Common specifications for high-voltage switchgear and control gear standards
GB/T 14549-1993 Quality of electric energy supply—Harmonics in public supply network
GB 17625.1-2003 Electromagnetic compatibility—limits—Limits—for harmonic current emissions(equipment input current≤16A per phase
GB/Z 17625.6-2003 Electromagnetic compatibility—Limits—Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16A
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold
GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold
GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products—Test Ca:Damp heat, steady state
GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state
GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
Related Standards
DB32/T 4487-2023
Active
DB32/T 4487-2023 Test method for dynamic torque of brake motor
DB21/T 2479-2015
Abolished
DB21/T 2479-2015 Permanent Magnet Induction Flexible Speed Regulation Device
DB35/T 1111-2011
Replaced
DB35/T 1111-2011 Electric rolling door machine
DL/T 2658-2023
Active
DL/T 2658-2023 Rapid Dynamic Response Synchronous Compressor Technology Specification
DL/T 2024-2019
Active