FZ/T 94011.3-2013 Active Industry standards-Textiles

FZ/T 94011.3-2013 Reeds—Part 3:Reeds for water-jet looms

Publish Date: 2013-10-17 Implement Date: 2014-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: FZ/T 94011.3-2013

Standard Type: Industry standards

Standard Status: Active

is_force_gb: no

CCS Name: Weaving Department Machinery and Instruments

ICS Name: Looms and weaving machines

Publish Date: 2013-10-17

Implement Date: 2014-03-01

Pages: 8 pages

Scope

This part of FZ/T 94011 specifies the terms and definitions, classification and marking, requirements, test methods, inspection rules, and packaging, marking, and storage of reeds for water-jet looms (hereinafter referred to as "water-jet reeds").
This part is applicable to flat-beam metal wire-tied reeds and groove-beam resin-cured metal wire-tied reeds used in water-jet looms.

Development Information

Word Count: 14 Thousand words Pages: 8 pages

Same series standard

FZ/T 94011.1-2013 Reeds—Part 1:Reeds for shuttle looms FZ/T 94011.2-2013 Reeds—Part 2:Reeds for rapier looms and projectile looms FZ/T 94011.4-2013 Reeds—Part 4:Reeds for warping machines and sizing machines FZ/T 94011.5-2013 Reeds—Part 5:Profiled blades for air-jet looms

Replace the following standards

FZ/T 94011-1992 Metal wire used for weaving steel shuttles in a loom

Referenced Standards

GB/T 24348.2-2009 Textile machinery and accessories—Reeds—Part 2:Dimensions and designation of metal reeds with plate baulk GB/T 24348.4-2009 Textile machinery and accessories—Reeds—Part 4:Dimensions and designation of plastic-bound metal reeds GB/T 24348.5-2009 Textile machinery and accessories—Reeds—Part 5:Dimensions and designation of profile capsules GB/T 25874.1-2010 Textile machinery and accessories—Strip steel for dents of reeds—Part 1:Cold rolled strip steel GB/T 25874.2-2010 Textile machinery and accessories—Strip steel for dents of reeds—Part 2:Hardened strip steel GB/T 191-2000 Packaging—Pictorial marking for handling of goods GB/T 191-2008 Packaging—Pictorial marking for handling of goods GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability) GB/T 4340.1-1999 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 4340.1-2009 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 4340.1-2024 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 191-2025 Graphical symbols marking for handling and storage of packages GB/T 2829-2025 Sampling procedures and tables for periodic inspection by attributes(Apply to inspection of process stability)

Related Standards

GB/T 8461-2003 Active

GB/T 8461-2003 Textile machinery and accessories—Cone sectional warping machines—Maximum usable width

Publish Date: 2003-02-10

GB/T 19385.1-2003 Active

GB/T 19385.1-2003 Textile machinery and accessories—Heald frames—Part1:Head-carrying rod fixed to the frame stave by rod support—Coordinated dimensions

Publish Date: 2003-11-10

GB/T 19385.2-2003 Active

GB/T 19385.2-2003 Textile machinery and accessories—Heald frames—Part2:heald-carrying rod fixed directly on the frame stave—Coordinated dimensions

Publish Date: 2003-11-10

GB/T 19385.3-2003 Active

GB/T 19385.3-2003 Textile machinery and accessories—Heald frames—Part3:Guides for heald frames

Publish Date: 2003-11-10

GB/T 19548-2004 Active

GB/T 19548-2004 Textile machinery and accessories—Weaving looms—Definition of left and right sides

Publish Date: 2004-06-11

GB/T 19551-2004 Active

GB/T 19551-2004 Textile machinery—Warp sizing machines—Maximum usable width

Publish Date: 2004-06-11