FZ/T 94011.2-2013 Active Industry standards-Textiles

FZ/T 94011.2-2013 Reeds—Part 2:Reeds for rapier looms and projectile looms

Publish Date: 2013-10-17 Implement Date: 2014-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: FZ/T 94011.2-2013

Standard Type: Industry standards

Standard Status: Active

is_force_gb: no

CCS Name: Weaving Department Machinery and Instruments

ICS Name: Looms and weaving machines

Publish Date: 2013-10-17

Implement Date: 2014-03-01

Pages: 8 pages

Scope

This part of FZ/T 94011 specifies the terms and definitions, classification and marking, requirements, test methods, inspection rules, and packaging, marking, and storage for rapier looms and shuttle looms (hereinafter referred to as "rapier reeds" and "shuttle reeds").
This part is applicable to resin-cured wire reeds used in rapier looms and shuttle looms.

Development Information

Word Count: 14 Thousand words Pages: 8 pages

Same series standard

FZ/T 94011.1-2013 Reeds—Part 1:Reeds for shuttle looms FZ/T 94011.3-2013 Reeds—Part 3:Reeds for water-jet looms FZ/T 94011.4-2013 Reeds—Part 4:Reeds for warping machines and sizing machines FZ/T 94011.5-2013 Reeds—Part 5:Profiled blades for air-jet looms

Replace the following standards

FZ/T 94011-1992 Metal wire used for weaving steel shuttles in a loom

Referenced Standards

GB/T 24348.4-2009 Textile machinery and accessories—Reeds—Part 4:Dimensions and designation of plastic-bound metal reeds GB/T 24348.5-2009 Textile machinery and accessories—Reeds—Part 5:Dimensions and designation of profile capsules GB/T 25874.1-2010 Textile machinery and accessories—Strip steel for dents of reeds—Part 1:Cold rolled strip steel GB/T 25874.2-2010 Textile machinery and accessories—Strip steel for dents of reeds—Part 2:Hardened strip steel GB/T 191-2000 Packaging—Pictorial marking for handling of goods GB/T 191-2008 Packaging—Pictorial marking for handling of goods GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability) GB/T 4340.1-1999 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 4340.1-2009 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 4340.1-2024 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 191-2025 Graphical symbols marking for handling and storage of packages GB/T 2829-2025 Sampling procedures and tables for periodic inspection by attributes(Apply to inspection of process stability)

Related Standards

GB/T 8461-2003 Active

GB/T 8461-2003 Textile machinery and accessories—Cone sectional warping machines—Maximum usable width

Publish Date: 2003-02-10

GB/T 19385.1-2003 Active

GB/T 19385.1-2003 Textile machinery and accessories—Heald frames—Part1:Head-carrying rod fixed to the frame stave by rod support—Coordinated dimensions

Publish Date: 2003-11-10

GB/T 19385.2-2003 Active

GB/T 19385.2-2003 Textile machinery and accessories—Heald frames—Part2:heald-carrying rod fixed directly on the frame stave—Coordinated dimensions

Publish Date: 2003-11-10

GB/T 19385.3-2003 Active

GB/T 19385.3-2003 Textile machinery and accessories—Heald frames—Part3:Guides for heald frames

Publish Date: 2003-11-10

GB/T 19548-2004 Active

GB/T 19548-2004 Textile machinery and accessories—Weaving looms—Definition of left and right sides

Publish Date: 2004-06-11

GB/T 19551-2004 Active

GB/T 19551-2004 Textile machinery—Warp sizing machines—Maximum usable width

Publish Date: 2004-06-11