GB/T 12967.1-2008 Replaced National standards

GB/T 12967.1-2008 Test methods for anodic oxidation coatings of aluminium and aluminium alloys—Part 1:Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus

GB/T 12967.1-2008 Test methods for anodic oxidation coatings of aluminium and aluminium alloys—Part 1:Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus

Publish Date: 2008-06-09 Implement Date: 2008-12-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 12967.1-2008

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: \nTest methods for the physical and chemical properties of metals

ICS Name: Surface treatment

Publish Date: 2008-06-09

Implement Date: 2008-12-01

Pages: 13 pages

Scope

1.1 This part specifies the test method for determining the average wear resistance of anodized films on aluminum and aluminum alloys using a spray abrasion tester, and comparing it with the wear resistance of standard samples and agreed reference samples. 1.2 This part is applicable to the inspection of anodized films on aluminum and aluminum alloys with a film thickness of not less than 5 μm, especially suitable for small samples with a test area diameter of about 2 mm and samples with uneven surfaces.

Development Information

Word Count: 23 Thousand words Pages: 13 pages

Same series standard

GB/T 12967.2-2008 Test methods for anodic oxidation coatings of aluminium and aluminium alloys—Part 2:Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus GB/T 12967.3-2008 Test methods for anodic oxidation coatings of aluminium and aluminium alloys—Part 3:Copper accelerated acetic acid salt spray test(CASS test) GB/T 12967.6-2008 Test Methods for anodic oxidation coatings of aluminium and aluminium alloys—Part 6:Determination of color differences and appearance of colored anodic oxide films by viewing method

Replace the following standards

GB/T 12967.1-1991 Anodizing of aluminium and aluminium alloys—Measurmeent of mean specific adrasion resistance of anodic oxidation coatings with an adrasive jet test apparatus

Superseded by the following standards

GB/T 12967.1-2020 Test methods for anodic oxidation coatings and organic polymer coatings of aluminium and aluminium alloys—Part 1:Measurement of abrasion resistance

Referenced Standards

GB/T 2481.1-1998 Bonded abrasives—Determination and designation of grain size distribution—Part 1:Macrogrits F4 to F220 GB/T 4957-2003 Non-conductive coatings on non-magnetic basis metals—Measurement of coating thickness-Eddy current GB/T 8005.3-2008 Aluminium and aluminium alloys—Terms and definitions—Part 3:Surface treatment GB/T 4957-2025 Non-conductive coatings on non-magnetic electrically conductive base metals—Measurement of coating thickness—Amplitude-sensitive eddy-current method

Adopt standards

ISO 8252:1987

Related Standards

GB 12607-1990 Replaced

GB 12607-1990 Designation for the design of thermal spraying coatings

Publish Date: 1990-12-18

GB/T 12612-1990 Replaced

GB/T 12612-1990 General specification for multifunctional solution of steel and iron surface treatment

Publish Date: 1990-12-18

GB/T 3138-1995 Replaced

GB/T 3138-1995 Terminology for metallic coating, chemical treatment and related process

Publish Date: 1995-07-27

GB/T 4955-1997 Replaced

GB/T 4955-1997 Metallic coatings—Measurement of coating thickness—Coulometric method by anodic dissolution

Publish Date: 1997-03-04

GB/T 17456-1998 Replaced

GB/T 17456-1998 Ductile iron pipes—External zinc-spray coating

Publish Date: 1998-08-12

GB/T 17460-1998 abolished_transferred

GB/T 17460-1998 Chemical conversion coatings—Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys

Publish Date: 1998-08-12