GB 12607-1990
Replaced
GB/T 12967.2-2008
Replaced
National standards
GB/T 12967.2-2008 Test methods for anodic oxidation coatings of aluminium and aluminium alloys—Part 2:Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus
GB/T 12967.2-2008 Test methods for anodic oxidation coatings of aluminium and aluminium alloys—Part 2:Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus
Basic Information
Standard Code:
GB/T 12967.2-2008
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
\nTest methods for the physical and chemical properties of metals
ICS Name:
Surface treatment
Publish Date:
2008-06-09
Implement Date:
2008-12-01
Pages:
12 pages
Scope
1.1 This part specifies a test method for determining the wear resistance and wear coefficient of anodized aluminum and aluminum alloy films using a wheel-type wear tester. 1.2 This part is applicable to the inspection of plate-like aluminum samples with an anodized film thickness of not less than 5 μm. The wear resistance and wear coefficient of the entire layer thickness of the anodized film, the surface layer, or any selected layer of the anodized film can be determined using this method. 1.3 This part is not applicable to the determination of anodized samples with uneven surfaces. 1.4 The determination of the wear resistance of organic polymer films can refer to this part.
Development Information
Same series standard
GB/T 12967.1-2008 Test methods for anodic oxidation coatings of aluminium and aluminium alloys—Part 1:Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus
GB/T 12967.3-2008 Test methods for anodic oxidation coatings of aluminium and aluminium alloys—Part 3:Copper accelerated acetic acid salt spray test(CASS test)
GB/T 12967.6-2008 Test Methods for anodic oxidation coatings of aluminium and aluminium alloys—Part 6:Determination of color differences and appearance of colored anodic oxide films by viewing method
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 9258.1-2000 Coated abrasives—Grain size analysis—Part 1:Grain size distribution test
GB/T 4957-2003 Non-conductive coatings on non-magnetic basis metals—Measurement of coating thickness-Eddy current
GB/T 8005.3-2008 Aluminium and aluminium alloys—Terms and definitions—Part 3:Surface treatment
GB/T 4957-2025 Non-conductive coatings on non-magnetic electrically conductive base metals—Measurement of coating thickness—Amplitude-sensitive eddy-current method
Adopt standards
ISO 8251:1987(E)
Related Standards
GB/T 12612-1990
Replaced
GB/T 12612-1990 General specification for multifunctional solution of steel and iron surface treatment
GB/T 3138-1995
Replaced
GB/T 3138-1995 Terminology for metallic coating, chemical treatment and related process
GB/T 4955-1997
Replaced
GB/T 4955-1997 Metallic coatings—Measurement of coating thickness—Coulometric method by anodic dissolution
GB/T 17456-1998
Replaced
GB/T 17456-1998 Ductile iron pipes—External zinc-spray coating
GB/T 17460-1998
abolished_transferred