GB/T 2423.38-2008 Replaced National standards

GB/T 2423.38-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test R:Water test method and guidance

GB/T 2423.38-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test R:Water test method and guidance

Publish Date: 2008-06-16 Implement Date: 2009-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 2423.38-2008

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Basic standards and general methods

ICS Name: Environment testing

Publish Date: 2008-06-16

Implement Date: 2009-03-01

Pages: 28 pages

Scope

This part of GB/T 2423 specifies the test methods applicable to electrical and electronic products that may be subject to drip, flush, or immersion during transportation, storage, or use. It assesses whether the sealing components of electrical and electronic products, such as casings and covers, can ensure the good working performance of the equipment and components after or during the water test.
The test methods specified in this part are not applicable to corrosion tests.
This part does not simulate the large temperature difference between water and the test piece, such as the increase in water intake caused by pressure changes and thermal shocks.
This part includes artificial rainfall tests based on natural conditions, but generally does not consider natural rainfall with strong wind speeds.
This part provides guidelines for the selection of tests and the application of severity levels.
This part can be used as a reference basis for product technical standards.

Development Information

Word Count: 48 Thousand words Pages: 28 pages

Same series standard

GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle) GB/T 2423.10-2008 Environmental testing for electric and electronic products—Part 2:Tests methods Test Fc:Vibration(sinusoidal) GB/T 2423.15-2008 Environmental testing for electric and electronic products—Part 2:Tests methods—Test Ga and guidance: Acceleration,steady GB/T 2423.16-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test J and guidance:Mold growth GB/T 2423.17-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ka:Salt mist GB/T 2423.21-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test M:Low air pressure GB/T 2423.25-2008 Environmental testing for eletric and electronic products—Part 2:Tests methods—Test Z/AM:Combined cold/low air pressure tests GB/T 2423.26-2008 Environmental testing for electric and electronic products—Part 2:Tests methods—Test Z/BM:Combined dry heat/low air pressure tests GB/T 2423.32-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ta:Solderability test by the wetting balance method GB/T 2423.39-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ee:Bounce GB/T 2423.43-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Mounting of specimens for vibration, impact and similar dynamic tests GB/T 2423.48-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ff:Vibration—Time-history method GB/T 2423.57-2008 Environmental testing for electric and electronic products—Part 2:Tests—Test Ei:Shock—Shock response spectrum synthesis GB/T 2423.58-2008 Environmental testing for electric and electronic products—Part 2:Tests methods—Test Fi:Vibration—Mixed Mode GB/T 2423.59-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test Z/ABMFh:Combined temperature(cold and heat)/low air pressure/vibration(random) GB/T 2423.60-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test U:Robustness of terminations and integral mounting devices GB/T 2423.101-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test:Inclinations and swings GB/T 2423.102-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test: combined temperature(cold and heat)/low air pressure/vibration(sinusoidal)

Replace the following standards

GB/T 2423.38-2005 Environmental testing for electric and electronic products—Part 2:Test methods—Test R:Water test method and guidance

Superseded by the following standards

GB/T 2423.38-2021 Environmental testing—Part 2:Test methods—Test R:Water test method and guidance

Referenced Standards

GB 4208-1993 Degrees of protection provided by enclosure (IP code) GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)

Adopt standards

IEC 60068-2-18:2000

Related Standards

GB/T 6587.1-1986 Replaced

GB/T 6587.1-1986 Environmental tests program for electronic measuring instruments

Publish Date: 1986-07-23

GB/T 6587.2-1986 Replaced

GB/T 6587.2-1986 Temperature tests for electronic measuring instruments

Publish Date: 1986-07-23

GB/T 6587.3-1986 Replaced

GB/T 6587.3-1986 Humidity tests for electronic measuring instruments

Publish Date: 1986-07-23

GB/T 6587.4-1986 Replaced

GB/T 6587.4-1986 Vibration tests for electronic measuring instruments

Publish Date: 1986-07-23

GB/T 6587.5-1986 Replaced

GB/T 6587.5-1986 Shock tests for electronic measuring instruments

Publish Date: 1986-07-23

GB/T 6587.6-1986 Replaced

GB/T 6587.6-1986 Transportation tests for electronic measuring instruments

Publish Date: 1986-07-23