GB/T 2423.58-2008 Active National standards

GB/T 2423.58-2008 Environmental testing for electric and electronic products—Part 2:Tests methods—Test Fi:Vibration—Mixed Mode

GB/T 2423.58-2008 Environmental testing for electric and electronic products—Part 2:Tests methods—Test Fi:Vibration—Mixed Mode

Publish Date: 2008-05-19 Implement Date: 2009-01-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 2423.58-2008

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Basic standards and general methods

ICS Name: Environment testing

Publish Date: 2008-05-19

Implement Date: 2009-01-01

Pages: 29 pages

Scope

The test methods provided in this section are suitable for samples that need to withstand simulated complex and mixed excitation vibration tests. The purpose of this section is to verify that the samples will not experience unacceptable functional and/or structural degradation after being subjected to specified mixed-mode excitation. When the vibration measurement data in the actual environment has a mixed-mode pattern, it is particularly suitable to tailor the vibration environment using this method. This section is also applicable to revealing the cumulative effects of random and sinusoidal and/or random mixed vibration stresses, as well as the resulting mechanical defects and degradation of specified performance of the samples. In combination with relevant standards, this information can be used to evaluate the acceptability of the samples. In some cases, this test method is also suitable for verifying the mechanical strength of the samples.

Development Information

Word Count: 52 Thousand words Pages: 29 pages

Same series standard

GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle) GB/T 2423.10-2008 Environmental testing for electric and electronic products—Part 2:Tests methods Test Fc:Vibration(sinusoidal) GB/T 2423.15-2008 Environmental testing for electric and electronic products—Part 2:Tests methods—Test Ga and guidance: Acceleration,steady GB/T 2423.16-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test J and guidance:Mold growth GB/T 2423.17-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ka:Salt mist GB/T 2423.21-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test M:Low air pressure GB/T 2423.25-2008 Environmental testing for eletric and electronic products—Part 2:Tests methods—Test Z/AM:Combined cold/low air pressure tests GB/T 2423.26-2008 Environmental testing for electric and electronic products—Part 2:Tests methods—Test Z/BM:Combined dry heat/low air pressure tests GB/T 2423.32-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ta:Solderability test by the wetting balance method GB/T 2423.38-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test R:Water test method and guidance GB/T 2423.39-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ee:Bounce GB/T 2423.43-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Mounting of specimens for vibration, impact and similar dynamic tests GB/T 2423.48-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ff:Vibration—Time-history method GB/T 2423.57-2008 Environmental testing for electric and electronic products—Part 2:Tests—Test Ei:Shock—Shock response spectrum synthesis GB/T 2423.59-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test Z/ABMFh:Combined temperature(cold and heat)/low air pressure/vibration(random) GB/T 2423.60-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test U:Robustness of terminations and integral mounting devices GB/T 2423.101-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test:Inclinations and swings GB/T 2423.102-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test: combined temperature(cold and heat)/low air pressure/vibration(sinusoidal)

Referenced Standards

GB/T 2421-1999 Environmental testing for electric and electronic products—Part 1:General and guidance GB/T 2423.10-2008 Environmental testing for electric and electronic products—Part 2:Tests methods Test Fc:Vibration(sinusoidal) GB/T 2423.43-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Mounting of specimens for vibration, impact and similar dynamic tests GB/T 2423.56-2006 Environmental testing for electric and electronic products—Part 2:Test methods—Test Fh:Vibration, broad-band random(digital control)and guidance IEC 60050-300:2001 IEC 60050-311 IEC 60050-312 IEC 60050-313 IEC 60050-314 IEC 60068-3-8:2003 IEC 60068-5-2:1990 ISO 2041:1990

Adopt standards

IEC 60068-2-80:2005(Ed.1.0)

Related Standards

GB/T 6587.1-1986 Replaced

GB/T 6587.1-1986 Environmental tests program for electronic measuring instruments

Publish Date: 1986-07-23

GB/T 6587.2-1986 Replaced

GB/T 6587.2-1986 Temperature tests for electronic measuring instruments

Publish Date: 1986-07-23

GB/T 6587.3-1986 Replaced

GB/T 6587.3-1986 Humidity tests for electronic measuring instruments

Publish Date: 1986-07-23

GB/T 6587.4-1986 Replaced

GB/T 6587.4-1986 Vibration tests for electronic measuring instruments

Publish Date: 1986-07-23

GB/T 6587.5-1986 Replaced

GB/T 6587.5-1986 Shock tests for electronic measuring instruments

Publish Date: 1986-07-23

GB/T 6587.6-1986 Replaced

GB/T 6587.6-1986 Transportation tests for electronic measuring instruments

Publish Date: 1986-07-23