GB/T 17923-1999
Replaced
YS/T 740-2010
Active
Industry standards-Non-ferrous metals
YS/T 740-2010 Method for determination of caustic alkalinity in wastewater of alumina industry
YS/T 740-2010 Method for determination of caustic alkalinity in wastewater of alumina industry
Basic Information
Standard Code:
YS/T 740-2010
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Analysis methods for light metals and their alloys
ICS Name:
Liquid waste, sludge
Publish Date:
2010-11-22
Implement Date:
2011-03-01
Pages:
5 pages
Scope
This standard specifies the method for determining the caustic alkalinity in industrial wastewater from the alumina industry.
This standard is applicable to the determination of caustic alkalinity in industrial wastewater from the alumina industry, with a measurement range of 50mg/L to 1000mg/L.
This standard is also applicable to the determination of caustic alkalinity in alkaline wastewater containing aluminum from other industries.
Development Information
Referenced Standards
GB/T 601-2002 Chemical reagent Preparations of standard volumetric solutions
GB/T 601-2016 Chemical reagent—Preparations of reference titration solutions
GB/T 603-2002 Chemical reagent—Preparations of reagent solutions for use in test methods
GB/T 603-2023 Chemical reagent—Preparations of reagent solutions for use in test methods
GB/T 12999-1991 Water quality sampling—Technical regulation of the preservation and handling of samples
Related Standards
GB 18420.1-2001
Replaced
GB 18420.1-2001 Biological toxicity grading for pollutant from marine petroleum exploration and exploitation
GB/T 18420.2-2001
Replaced
GB/T 18420.2-2001 Biological toxicity inspection method for pollutant from marine petroleum exploration and exploitation
GB 18420.1-2009
Active
GB 18420.1-2009 Biological toxicity for pollutants from marine petroleum exploration and exploitation—Part 1:Grading
GB/T 18420.2-2009
Active
GB/T 18420.2-2009 Biological toxicity for pollutants from marine petroleum exploration and exploitation—Part 2:Test method
YS/T 119.12-2010
Active