GB/T 2681-1981
Abolished
GB/T 9089.5-2008
Active
National standards
GB/T 9089.5-2008 Electrical Installations for outdoor sites under heavy conditions—Part 5:Operating requirements
GB/T 9089.5-2008 Electrical Installations for outdoor sites under heavy conditions—Part 5:Operating requirements
Basic Information
Standard Code:
GB/T 9089.5-2008
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Health, safety, and labor protection
ICS Name:
Comprehensive Electrical Engineering
Publish Date:
2008-06-18
Implement Date:
2009-03-01
Pages:
9 pages
Scope
This part of GB 9089 specifies the normal operating procedures that should be implemented to ensure personal safety. These procedures may differ from the system operations carried out under certain control conditions.
The scope of GB/T 9089.1—2008 applies to this part.
Development Information
Same series standard
GB/T 9089.1-2008 Electrical installations for outdoor sites under heavy conditions—Part 1:Scope and definitions
GB/T 9089.2-2008 Electrical installations for outdoor sites under heavy conditions—Part 2:General protection requirements
GB/T 9089.3-2008 Electrical installations for outdoor sites under heavy conditions—Part 3:General requirements for equipment and ancillaries
GB/T 9089.4-2008 Electrical installations for outdoor sites under heavy conditions—Part 4:Requirements for the installation
Replace the following standards
Referenced Standards
Adopt standards
IEC 60621-5:1987
Related Standards
GB/T 2682-1981
Abolished
GB/T 2682-1981 Colors of indicator lights and push-buttons used in electrical assembly devices
GB/T 3926-1983
Replaced
GB/T 3926-1983 Rated voltage for medium frequency equipment
GB/T 4064-1983
Abolished
GB/T 4064-1983 General guide for designing of electrical equipment to satisfy safety requirements
GB/T 4776-1984
Replaced
GB/T 4776-1984 Electrical safety terminology
GB/T 5080.4-1985
Active