GB/T 25688.2-2010 Active National standards

GB/T 25688.2-2010 Earth-moving machinery—Service tools—Part 2:Mechanical pullers and pushers

GB/T 25688.2-2010 Earth-moving machinery—Service tools—Part 2:Mechanical pullers and pushers

Publish Date: 2010-12-23 Implement Date: 2011-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 25688.2-2010

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Construction engineering construction machinery

ICS Name: Earthmoving machinery

Publish Date: 2010-12-23

Implement Date: 2011-07-01

Pages: 12 pages

Scope

This part of GB/T 25688 specifies the types, general requirements, and main nominal dimensions of mechanical pullers, pushers, clamps, and connecting devices used for repairs.
This part applies to mechanical pullers, pushers, clamps, and connecting devices used for disassembling gears and bearings on earthmoving machinery defined in GB/T 8498.
Note: Manufacturers should consider the following:
——The use of pullers and pushers for repairs (see Figures A.1, A.4, and A.5 in Appendix A);
——Selecting machine design dimensions from Tables 1 to 4;
——The types of repair tools specified in the appropriate manual in accordance with GB/T 25622.

Development Information

Word Count: 21 Thousand words Pages: 12 pages

Same series standard

GB/T 25688.1-2010 Earth-moving machinery—Service tools—Part 1:Common maintenance and adjustment tools

Referenced Standards

GB/T 8498-1999 Earth-moving machinery—Basic types—Vocabulary GB/T 8498-2008 Earth-moving machinery—Basic type—Identification and terms and definitions GB/T 8498-2017 Earth-moving machinery—Basic types—Identification and terms and definitions GB/T 25622-2010 Earth-moving machinery—Operator's manual—Content and format GB/T 25622.1-2023 Earth-moving machinery—Operator’s manual—Part 1:Contents and format GB/T 25688.1-2010 Earth-moving machinery—Service tools—Part 1:Common maintenance and adjustment tools GB/T 8498-2025 Earth-moving machinery—Basic types—Identification and vocabulary

Adopt standards

ISO 4510-2:1996

Related Standards

GB/T 6375-1986 Replaced

GB/T 6375-1986 Earth-moving machinery—Method of test for the measurement of draw-bar pull

Publish Date: 1986-05-13

GB/T 6572.2-1986 Replaced

GB/T 6572.2-1986 Excavators terminology—Cable operated type

Publish Date: 1986-07-22

GB/T 13331-1991 Replaced

GB/T 13331-1991 Hydraulic excavators—Methods of measuring lift capacity

Publish Date: 1991-12-16

GB/T 13332-1991 Replaced

GB/T 13332-1991 Hydraulic excavators—Methods of measuring tool forces

Publish Date: 1991-12-16

GB/T 14289-1993 Active

GB/T 14289-1993 Earth-moving machinery—Diagnostic ports

Publish Date: 1993-04-17

GB/T 14780-1993 Replaced

GB/T 14780-1993 Earth-moving machinery—Drain, fill and level plugs

Publish Date: 1993-12-27