SB/T 10413-2007
Active
GB/T 30103.3-2013
Active
National standards
GB/T 30103.3-2013 Methods of testing for thermal performance on cold store—Part 3:Heat flux testing for envelop enclosure
GB/T 30103.3-2013 Methods of testing for thermal performance on cold store—Part 3:Heat flux testing for envelop enclosure
Basic Information
Standard Code:
GB/T 30103.3-2013
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Refrigeration equipment
ICS Name:
Commercial refrigeration equipment
Publish Date:
2013-12-17
Implement Date:
2014-11-01
Pages:
13 pages
Scope
This part of GB/T 30103 specifies the test methods for the heat flux and heat transfer coefficient of the enclosure structure in the thermal insulation performance of civil cold storage and prefabricated cold storage.
This part is applicable to the calculation of the thermal insulation performance and energy consumption impact of various types of new and old cold storage rooms.
Development Information
Same series standard
Referenced Standards
SBJ 17
GB/T 3399-1982 Test method for thermal conductivity of plastics by means of the guarded hot plate
GB/T 10294-1988 Thermal insulation—Determination of steady-state thermal resistance and related properties—Guarded hot plate apparatus
GB/T 10294-2008 Thermal insulation—Determination of steady-state thermal resistance and related properties—Guarded hot plate apparatus
GB/T 10295-1988 Thermal insulation—Determination of steady-state thermal resistance and related properties—Heat flow meter apparatus
GB/T 10295-2008 Thermal insulation—Determination of steady-state thermal resistance and related properties—Heat flow meter apparatus
GB/T 10297-1998 Test method for thermal conductivity of nonmetal solid materials by hot-wire method
GB/T 10297-2015 Test method for thermal conductivity of nonmetal solid materials—Hot-wire method
GB/T 10801.1-2002 Moulded polystyrene foam board for thermal insulation
GB/T 10801.1-2021 Moulded polystyrene foam for thermal insulation(EPS)
GB/T 10801.2-2002 Rigid extruded polystyrene foam board for thermal insulation (XPS)
GB/T 10801.2-2018 Rigid extruded polystyrene foam board for thermal insulation(XPS)
GB/T 15912.1-2009 Monitoring and testing method for energy conservation of refrigerating systems—Part 1:Cold storage systems
GB/T 20219-2006 Spray-applied rigid polyurethane cellular plastics
GB/T 20219-2015 Rigid cellular plastics-spray-applied polyurethane foam for thermal insulation
GB/T 21558-2008 Rigid polyurethane cellular plastics used in the thermal insulation of building
GB/T 30103.1-2013 Methods of testing for thermal performance on cold store—Part 1:Temperature and humidity testing
GB/T 30103.2-2013 Methods of testing for thermal performance on cold store—Part 2:Air velocity testing
GB 50072-2021 Code for design of cold store
GB/T 10801.1-2025 Moulded polystyrene foam(EPS)for thermal insulation
GB/T 10801.2-2025 Rigid extruded polystyrene foam(XPS) board for thermal insulation
GB/T 21558-2025 Rigid polyurethane foam for building thermal insulation
Related Standards
SB/T 10414-2007
Active
SB/T 10414-2007 Flake ice machines
SB 10424-2007
Active
SB 10424-2007 Safety of household and similar electrical appliances—Particular requirements forcommercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor
SB/T 10427-2007
Active
SB/T 10427-2007 Requirement of energy saving for air conditioning and refrigeration of the department store and hypermarket
GB/T 21000.1-2007
Active
GB/T 21000.1-2007 Commercial refrigerated cabinets—Methods of test—Part 1:General test conditions and temperature test
GB/T 21000.2-2007
Active